red fury

iTrader: (1)

with a M6 4.10 geared full weight car how much of a difference would it make to kick the N20 on at 3000rpm instead of 3600 rpm?? 100shot

i typically run high 1.8's on motor leaving just above idle

have not made any runs at the track on the spray

gator's 99TA

iTrader: (2)

on drag radials its gonna be TOUGH. not so much a matter or rpm as it is traction conditions and clutch management. that clutch locks up and the nitrous hits, nittos are gonna be upset.

red fury

iTrader: (1)

thanks 99TA for the response.....

I thought for sure someone would have tried this with DR's/4.10's/M6 and could shed some light on what kind of improvement on my 60' I could exspect.

I leave the line just off idle...roll out and mash it. I am wondering if Iam already through the 60' mark before I reach 3000rpm.

Mr 35th

I tried and spun through 1st and had a 1.8 60'