Gearing question for racing... Ok, on my 3.23's, I currently run the traps at 5300rpm in D running all motor at 11.79 @ 112mph. Once 3rd hits, I pick up slowly. My shifts are at 6900 and car pulls great until the big 3rd, then it gradually picks up. Running MT DR 275x50x15 (basically the 26x15). Should I go 3.73 or 4.10? I dont plan on keeping the rear or tire size this way for long, but until I swap to 9" and bigger tires what do you think? TSP 231/237 112* cam, PP 5.3L heads, Level 2 Cmotor Trans, Fuddle 3800 Stall... TIA Charlie |
id try shifting sooner and see how that canges your times first. if this is striclty a race car then put as much gear in as your motor can handle, street car, i would say probably a 3.73 |
Mix street and strip. Basically race it almost every w/e. I tried the lower rpms and when I started to raise it, she ran quicker. Only getting about 19mph in the top half, NA that is. Going to hit the nitrous soon, so might end up staying put. |
Originally Posted by CAT3 Ok, on my 3.23's, I currently run the traps at 5300rpm in D running all motor at 11.79 @ 112mph. Once 3rd hits, I pick up slowly. My shifts are at 6900 and car pulls great until the big 3rd, then it gradually picks up. Running MT DR 275x50x15 (basically the 26x15). Should I go 3.73 or 4.10? I dont plan on keeping the rear or tire size this way for long, but until I swap to 9" and bigger tires what do you think? TSP 231/237 112* cam, PP 5.3L heads, Level 2 Cmotor Trans, Fuddle 3800 Stall... TIA Charlie Right now I'm running 4.70's with a 28" tire and fixing to put 4.86's in it with a Turbo 400 setup in the car.. |
All times are GMT -5. The time now is 07:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands