|
Car is back from Madman's picked up Project "Censored" today from Madman Racing. Here is what it had done in the last two weeks: Wolfe 10-point chrome moly cage (certified for 7.50 ET or slower) cam-lock harnesses installed (both seats) window net installed Wolfe thru-floor subframe connectors Billingsley fab 9" rearend w/ anti-roll bar (35-spline, gun drilled axles) BMR torque arm, LCA's, panhard BMR k-member with upper and lower A's QA1 coil overs Aerospace front brakes Strange rear brakes New brake lines and braided lines Custom tranny x-member TCI Dedenbear cased Powerglide installed TCI torque converter (stalled for 900-1000 rwhp @ 3000 lbs) TCI Bandit shifter TCI trans-brake TCI tranny cooler Thunder Racing line-lock kit Billingsley ABS delete block Madman manual front steering rack Madman heater delete firewall plate A/C system completely removed (including inside dash) catback system removed Power steering pump removed airbags removed ARP lug studs pressed into front hubs Up next: 408ci iron block to be built by LME AFR 225 heads Custom twin-turbo setup to be built by Pro Turbo Kits (twin 60mm) I'm building the car to run in the Extreme Modified class :devil:. Might have it done by the Thunder Racing event in November.... |
Sounds like things are coming along nicely. Congrats. |
pics? |
good to know you're hard at work on another project Tony :D |
Tony Car looks great cant wait to see it FLY........ |
Looks badass. Just curious, why didn't you go with a Madman torque arm (since you seem to be going pretty hardcore with everything else) ? |
Bad ass Tony...... Shooting for Thunder huh...... When is the car sapposed to go to PTK??? That should take the longest...... What engine management you going with??? BS3? Good luck Kyle |
Sweet!!!! Looks good. |
Any pics of the cage straight in through the door? Car looks great, Shawn |
Turo: suspension components are sponsored by BMR. Its their Extreme-Duty chromoly stuff, not the typical street stuff. Kyle: I'll be doing the engine before the PTK visit. Maybe a month or two away. Probably going to use BS3 Spanky: Only pics I have. I'll get some more later once I clean up the interior and put new carpet and seats in it. |
Originally Posted by Nine Ball Turo: suspension components are sponsored by BMR. Its their Extreme-Duty chromoly stuff, not the typical street stuff. Kyle: I'll be doing the engine before the PTK visit. Maybe a month or two away. Probably going to use BS3 Spanky: Only pics I have. I'll get some more later once I clean up the interior and put new carpet and seats in it. |
8.50's or slower on the chassis cert. New rule. |
Wrong it has a 7.50 or slower for the next 3 years. The 8.50 sticker goes into affect in jan. 2006 |
Nice to see a 98 gettin some love since we are the Bastard year :jest: |
Once again...looks awesome. But i got a technical Q for you. Why is the caulking poored around the backs of the subframes on the floor. Why aren't they welded in that area? |
Tony, what made you go with the front Aerospace brakes over the Strange? I ordered my new rear end with the rear Strange brakes which is what you have, but was curious as to why you went with different fronts. |
Looks very Nice. Did you get the rearend narrowed any? What size wheel did you go with and what is the back spacing? |
tony, i must know...what do you do for a living? b/c im gonna seriously look into doing that as well!! nice pics and good luck with the car! Jon |
Originally Posted by MADMAN Wrong it has a 7.50 or slower for the next 3 years. The 8.50 sticker goes into affect in jan. 2006 |
| All times are GMT -5. The time now is 11:01 AM. |
© 2026 MH Sub I, LLC dba Internet Brands