3.23's with 28" tires?
 

Well I am going to put some different gears on the T/A. I was originally going to put some 3.50's but I have decided to put some 3.23's to spool up the turbos some more is my thinking right or should I stay with the 3.50's? I have 3.70's right now so any advice would be greatly appreciated. I have an INCON TT kit with a forged 346 low CR engine with a 6 speed. Let me know what you think.

I use to have 26" tires if that needs to be known. I would hit the rev limiter in third gear in the 1/8th with this combo.

i would say go with the 3.50 gear ratio if you're movin up to a 28" tire

3.23 should be a sweet street machine....


oh by the way i finally got my car buttoned up with your d1sc on it... now i just have to finish a few things on tunning it.... yeah i know it took me for EVER.... but when i bought it my car was right in the middle of being torn apart into a million pieces..... and it never goes back together the same :jest: .... now its just cold and sux driving around with no HVAC.... i use to 60ft 1.5x easy.... i went to the track with it in october and lit the tires all the way to the 60ft and then let up... im hoping for a mid 1.3x...

enoy those turbos! :drive:

Thanks! It is about time you got that on the road though LOL. I haven't been able to pull anymore than a 1.6XX sixty so far. I am installing an Extreme rear anti sway bar and LCA with some 28" tires so Hopefully I can get down to a 1.5 to 1.4. I want a vid of your car with old Procharger. I bet it freakin rocks.