2.73 guys your best et? post here!
#5
TECH Junkie
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 3,987
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.73 guys your best et? post here!
Pretty much stock 12.51 @108 1.74 60 with vig 3200
Trending Topics
#8
Re: 2.73 guys your best et? post here!
11.9 @ 119 on a 2.09 60'. I get alot of "Wow, 119 on a 2.73." That's spraying the **** out of it though.
Oh, NO weight reduction either.
Oh, NO weight reduction either.
#9
Launching!
iTrader: (7)
Re: 2.73 guys your best et? post here!
Any STOCK converter, stock tire, w/o a power adder 2.73 cars faster than mine? I have had a post up on LS1.com for months and nobody has stepped up.
2001 Z28 2.73 with Eagle GA tires (235mm stockers)
Free mods
! front swaybag, rear seats, spare tire/jack
Gutted cats
Dynomax bullet muffler at the end of the Y-pipe, nothing after.
Whisper Lid, K&N filter
desrceened MAF
Aluminum driveshaft (Stock Aluminum LS1)
12.59 @ 109.7mph 1.92 60FT.Very good weather, high 40's
Then I adder Hooker Longtubes(running open) and a FTRA:
12.61 @ 111.3mph 1.88 60FT. Bad weather, about 90
The Open heareds are screwing with the o2 readings, resulting in it running WAY rich. So there is more to gain there. I bet on a good hook in nice weather a 12.35 @ 112mph is possible.
I'd like to do full bolt-ons and see if a stock stall, 2.73 car w/o a power adder can clip an 11 sec slip.....think it can be done in good weather on a good hooking track?
2001 Z28 2.73 with Eagle GA tires (235mm stockers)
Free mods
! front swaybag, rear seats, spare tire/jack
Gutted cats
Dynomax bullet muffler at the end of the Y-pipe, nothing after.
Whisper Lid, K&N filter
desrceened MAF
Aluminum driveshaft (Stock Aluminum LS1)
12.59 @ 109.7mph 1.92 60FT.Very good weather, high 40's
Then I adder Hooker Longtubes(running open) and a FTRA:
12.61 @ 111.3mph 1.88 60FT. Bad weather, about 90
The Open heareds are screwing with the o2 readings, resulting in it running WAY rich. So there is more to gain there. I bet on a good hook in nice weather a 12.35 @ 112mph is possible.
I'd like to do full bolt-ons and see if a stock stall, 2.73 car w/o a power adder can clip an 11 sec slip.....think it can be done in good weather on a good hooking track?
#13
TECH Regular
iTrader: (10)
Join Date: Nov 2001
Location: La Vernia, TX
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.73 guys your best et? post here!
Stock rotating assembly plus Comp 216/220 cam
Stock heads with fresh valve job(stock valves but better springs)
SlP lt headers
Flowmaster exhaust
MTI lid
Hughes 3500 stall
And 2.73's
Times in sig
Stock heads with fresh valve job(stock valves but better springs)
SlP lt headers
Flowmaster exhaust
MTI lid
Hughes 3500 stall
And 2.73's
Times in sig