SYAB don't fit
 

Anyone have problems with their SYAB not lining up? the tabs that are supposed to bolt to my K member don't line up. Could this be because I'm running a PA tubular K member?

Mine bolted right on my PA K-member.

They use one of the chassis bolts. I will go see if I can snap a pic or two

http://i301.photobucket.com/albums/n...29Jun08005.jpg
http://i301.photobucket.com/albums/n...29Jun08006.jpg
http://i301.photobucket.com/albums/n...29Jun08007.jpg

Mine are the same as the pics.

Coach

The SYA bars for the PA K-Member are not the same as the BMR and other K-Members. Give Madman a call.

You need to specify which K-Member you are running so it'll bolt right up and have enough ground clearance.

G/L

he didnt ask me which one i had????????????? i had to modify mine before i put mine own. mine would not sit right on the crossbar on the k-member.

I'm gonna try it again tomorrow. I was considering switching to a spohn K member to run solid motor mounts. So I was hoping if they don't line up with my PA the would work with the spohn.

I have the PA. Mine didnt fit. Do you have tubular A arms? I dont, Madman said that why they didnt fit?
Didnt matter because with the big Kooks headers they didnt extend down far enough. I just cut the tab with the bolt hole off and put an extension in the tube and welded it up. not that big of a deal.

I have tubular A arms

Mine fit fine with the PA K-member

And so did mine today :D, we were lining them up with the wrong bolt holes :bang:. Guess thats what happens after you worked 12 straight hours.

Glad to see them on ;) I had a feeling that was...i thought that is how they went on also LOL!

Thanks for the pics!