Gutting all underhood wires??
#1
TECH Junkie
Thread Starter
iTrader: (71)
Join Date: Mar 2002
Location: East Brady, Pa
Posts: 3,703
Likes: 0
Received 0 Likes
on
0 Posts
Gutting all underhood wires??
Just got back from the track and there was an SS there that the wires were totally gutted. Both underhood fuse boxes were gone along with all the wires down the passenger side. Has anyone done this? They weren't relocated...they were gone. The guy said he got some kind of race harness from GM and hardwired the motor?? He still had the PCM and all the MAF and TB wires that I could see. Said he dropped 150lbs getting rid of everything.
#2
TECH Apprentice
Join Date: Nov 2001
Location: ROWLETT TX USA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gutting all underhood wires??
Just got back from the track and there was an SS there that the wires were totally gutted. Both underhood fuse boxes were gone along with all the wires down the passenger side. Has anyone done this? They weren't relocated...they were gone. The guy said he got some kind of race harness from GM and hardwired the motor?? He still had the PCM and all the MAF and TB wires that I could see. Said he dropped 150lbs getting rid of everything.
#5
TECH Junkie
Thread Starter
iTrader: (71)
Join Date: Mar 2002
Location: East Brady, Pa
Posts: 3,703
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gutting all underhood wires??
Yup you guessed it Tom. Car runs pretty darn good. Is he a member here? I know he goes by pewterss on www.pittspeed.com
Trending Topics
#8
TECH Enthusiast
iTrader: (22)
Join Date: Dec 2002
Location: mt.pleasant pa 15666
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gutting all underhood wires??
whats up guys i'm brian with the pewterss w/flames
the wiring i used is 4 a street rod. gm sells them but there made by painless.they make a 12 circuit& 18 circuit.summit sells them 4 like $300.00
the wiring i used is 4 a street rod. gm sells them but there made by painless.they make a 12 circuit& 18 circuit.summit sells them 4 like $300.00
#10
TECH Enthusiast
iTrader: (22)
Join Date: Dec 2002
Location: mt.pleasant pa 15666
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gutting all underhood wires??
it just runs ur lights pw,pl wipers etc.
u make ur engine harness stand alone.
just like putting a engine drop out in a street rod or a older car.
u make ur engine harness stand alone.
just like putting a engine drop out in a street rod or a older car.
#12
Re: Gutting all underhood wires??
I am confused
Do you mean that it doesn't have any wiring for the tranny at all. Just the engine?
What about dash lights, speedo etc?
thanks for any clarification
Chris
Do you mean that it doesn't have any wiring for the tranny at all. Just the engine?
What about dash lights, speedo etc?
thanks for any clarification
Chris
#13
TECH Enthusiast
iTrader: (22)
Join Date: Dec 2002
Location: mt.pleasant pa 15666
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gutting all underhood wires??
no engine wire at. but they do make one.
it has all the hook ups.headlight,a/c,speedo,etc.
i used all after market gauges in a t/a dash shell.look on http://www.summitracing.com/ under painless wiring or give me a call Brian @ 1-800-680-2959
it has all the hook ups.headlight,a/c,speedo,etc.
i used all after market gauges in a t/a dash shell.look on http://www.summitracing.com/ under painless wiring or give me a call Brian @ 1-800-680-2959