Late Model Racecraft just finished my 600+ all motor
02-20-2009, 04:57 AM
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: spring
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Late Model Racecraft just finished my 600+ all motor I finally got with steven at LMR, and had them build me a LME lsx 440...
Yesterday was finally dyno tune time,and there tuner joe, with a safe tune up,running pump gas,and some heavy wheels that were lying around the shop,since i still dont have my wheels lol.... MADE 612rwhp,552rwtq... And that was sae..
Big thanks to Steven aka "WORM" for sending me in the right direction..
Paul which is put the longblock,and car together flawless..
Last but not least Joe Honeycut for tunning this car to make the power it did safely
http://www.youtube.com/watch?v=PnnmsPc4cLw
My setup is as follow
LSX 440ci 12:1 compression
Trickflow 245's heads
custom nitrous cam shaft
92mm intake
1 7/8in. ARH
Borla exhaust for a ZO6 that lmy fitted on my c6
RPS carbon on carbon race clutch
Yesterday was finally dyno tune time,and there tuner joe, with a safe tune up,running pump gas,and some heavy wheels that were lying around the shop,since i still dont have my wheels lol.... MADE 612rwhp,552rwtq... And that was sae..
Big thanks to Steven aka "WORM" for sending me in the right direction..
Paul which is put the longblock,and car together flawless..
Last but not least Joe Honeycut for tunning this car to make the power it did safely
http://www.youtube.com/watch?v=PnnmsPc4cLw
My setup is as follow
LSX 440ci 12:1 compression
Trickflow 245's heads
custom nitrous cam shaft
92mm intake
1 7/8in. ARH
Borla exhaust for a ZO6 that lmy fitted on my c6
RPS carbon on carbon race clutch
02-20-2009, 06:31 AM
#2
Teching In
iTrader: (3)
Join Date: Jul 2005
Location: Ft. lauderdale, Florida
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Those are some tremendous numbers! Congrats! 
Can't wait to see what it puts out on the spray, assuming you car since you have a custom cam for it.
again, great job by the guys at LMR! Enjoy the ride!
Can't wait to see what it puts out on the spray, assuming you car since you have a custom cam for it.
again, great job by the guys at LMR! Enjoy the ride!
...LOL Very nice numbers.
