Things to know before you DYNO?
#1
TECH Veteran
Thread Starter
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
Things to know before you DYNO?
I have learned a couple things in my past two tunes and I was wondering if there is anything else? TSP only really tuned my car for peak power and there was a nasty lean spike at the bottom of the graph which in turn was the reason for my TQ being rather low. (372rw wit LS6 heads and PatG Tq cam.)
-I don't want to see a lean spike with the tune
-I want a full readout from start to finish. Not clipped from 3500rpm to redline.
-Learned to be VERY specific about what I am looking for and what the cam is designed for.
-What mapping/graph? SAE? Standard? What is preferred?
Correct me if I'm wrong.
-I don't want to see a lean spike with the tune
-I want a full readout from start to finish. Not clipped from 3500rpm to redline.
-Learned to be VERY specific about what I am looking for and what the cam is designed for.
-What mapping/graph? SAE? Standard? What is preferred?
Correct me if I'm wrong.
#5
TECH Apprentice
Join Date: Nov 2004
Location: Long Beach, Ka
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Correction factoring won't be as important for tuning as it would be for dyno #'s.
HTH