Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

Advanced Induction Heads/Cam LS3

Thread Tools
 
Search this Thread
 
Old 08-13-2012, 01:26 PM
  #1  
TECH Addict
Thread Starter
iTrader: (4)
 
Mike454SS's Avatar
 
Join Date: Oct 2004
Location: Manchester, CT
Posts: 2,139
Likes: 0
Received 3 Likes on 3 Posts

Default Advanced Induction Heads/Cam LS3

I posted this in the Gen 4 Internal Engine section...but thought I'd put it here too.

Smoothing on 0 and SAE put the car at 499 RWHP. Smoothing on 5 put it at 494. I'm thrilled with this setup.



[youtube]ydURXwdlcIQ[/youtube]

I'm going to try to take it to the track Wednesday night. Any predictions on the ET/MPH? The car is a HEAVY 2010 SS M6, I think 3900 pounds (last time out it weighed 3997, but had some crap in the trunk).
Old 08-13-2012, 02:04 PM
  #2  
TECH Enthusiast
iTrader: (13)
 
GA95DCMSS's Avatar
 
Join Date: Sep 2007
Location: SC
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice Results! I actually just placed an order to get the same cam cut, but on different lobes (a little more lift) for the 6.0 in my Impala SS. I think it'll go nicely with my new heads too.

I'm gonna say best pass @ 11.7-11.8 @ 114-116.
Old 08-13-2012, 03:55 PM
  #3  
TECH Addict
Thread Starter
iTrader: (4)
 
Mike454SS's Avatar
 
Join Date: Oct 2004
Location: Manchester, CT
Posts: 2,139
Likes: 0
Received 3 Likes on 3 Posts

Default

Originally Posted by GA95DCMSS
Nice Results! I actually just placed an order to get the same cam cut, but on different lobes (a little more lift) for the 6.0 in my Impala SS. I think it'll go nicely with my new heads too.

I'm gonna say best pass @ 11.7-11.8 @ 114-116.
MPH better be higher than that lol...last year it trapped 114-116 with 425 RWHP!!!
Old 08-13-2012, 04:03 PM
  #4  
TECH Enthusiast
iTrader: (13)
 
GA95DCMSS's Avatar
 
Join Date: Sep 2007
Location: SC
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts

Default

Lol What was the ET?
Old 08-13-2012, 04:20 PM
  #5  
10 Second Club
iTrader: (30)
 
djfury05's Avatar
 
Join Date: Jan 2008
Location: Beaufort, SC
Posts: 3,430
Likes: 0
Received 3 Likes on 2 Posts

Default

Nice.. I'd say 121-122 probably
Old 08-13-2012, 05:10 PM
  #6  
TECH Junkie
 
1989GTA's Avatar
 
Join Date: Dec 2005
Posts: 3,092
Likes: 0
Received 5 Likes on 5 Posts

Default

I will say 121 with lower 11's. Maybe 11.3 or there abouts. With a stick shift you will be the key as to how low time wise it will be.
Old 08-13-2012, 10:05 PM
  #7  
TECH Addict
Thread Starter
iTrader: (4)
 
Mike454SS's Avatar
 
Join Date: Oct 2004
Location: Manchester, CT
Posts: 2,139
Likes: 0
Received 3 Likes on 3 Posts

Default

Originally Posted by GA95DCMSS
Lol What was the ET?
Last year was mid 12's, I think my best was a 12.530 on a crappy 1.89 60'. I cut a few 1.70 60's but somehow always managed to screw up the rest of the run.

In May of this year I went to the track with this setup, my tune was a total disaster (was 45 horse off where it is now all just in the tune), and I only got 2 full passes in...and I REALLY screwed up both of them, rev limiters, missed shifts, horrible launches...and the car still went 12.1 both times.

Originally Posted by djfury05
Nice.. I'd say 121-122 probably
That's what I'm hoping for. LVD in NY doesn't always have the best air/MPH, and that's where I'm going...but if I run decently, I'll go to NED in NH soon too where that's usually the opposite.

Originally Posted by 1989GTA
I will say 121 with lower 11's. Maybe 11.3 or there abouts. With a stick shift you will be the key as to how low time wise it will be.
Yeah, like I said above, I usually manage to screw up my passes somehow...I'm so comfortable driving the car on the highway...never miss a shift, never bump the rev limiter...put a helmet on my head and make it perfectly legal to drive it ***** out...and I mess up almost every time lol. If I can get the 60' down where it should be, and not mess up the rest of the run, I don't see how the car won't go mid 11's.
Old 08-13-2012, 10:29 PM
  #8  
TECH Senior Member
iTrader: (96)
 
01ssreda4's Avatar
 
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 79 Likes on 70 Posts

Default

Nice numbers. Lots of torque.
Old 08-14-2012, 11:39 AM
  #9  
TECH Enthusiast
iTrader: (13)
 
GA95DCMSS's Avatar
 
Join Date: Sep 2007
Location: SC
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Mike454SS
Last year was mid 12's, I think my best was a 12.530 on a crappy 1.89 60'. I cut a few 1.70 60's but somehow always managed to screw up the rest of the run.

In May of this year I went to the track with this setup, my tune was a total disaster (was 45 horse off where it is now all just in the tune), and I only got 2 full passes in...and I REALLY screwed up both of them, rev limiters, missed shifts, horrible launches...and the car still went 12.1 both times.

Yeah, like I said above, I usually manage to screw up my passes somehow...I'm so comfortable driving the car on the highway...never miss a shift, never bump the rev limiter...put a helmet on my head and make it perfectly legal to drive it ***** out...and I mess up almost every time lol. If I can get the 60' down where it should be, and not mess up the rest of the run, I don't see how the car won't go mid 11's.
You sound like me. I checked my logs at the track when my car ran a 12.7, and it showed 89-90% throttle...turns out I had my seat too far back and wasn't going full WOT...amateur mistake lol.

In that case, I say you'd still go 11.8 at 119...just because you'd screw it up somehow. On a good run. I'd give you 11.5 or lower with a bomb *** 60 ft. Get some drag radials on that thing and let her eat!!
Old 08-14-2012, 03:41 PM
  #10  
TECH Addict
Thread Starter
iTrader: (4)
 
Mike454SS's Avatar
 
Join Date: Oct 2004
Location: Manchester, CT
Posts: 2,139
Likes: 0
Received 3 Likes on 3 Posts

Default

Originally Posted by GA95DCMSS
Get some drag radials on that thing and let her eat!!
It's got drag radials on it...Nitto NT555r 275/40/20's are NOT cheap lol.
Old 08-14-2012, 03:44 PM
  #11  
TECH Enthusiast
iTrader: (13)
 
GA95DCMSS's Avatar
 
Join Date: Sep 2007
Location: SC
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts

Default

Jesus, I can imagine lol. I'll stick with my 275 MT ET Streets...got em barely scuffed with wheels for 200.00 shipped.
Old 08-14-2012, 09:23 PM
  #12  
TECH Addict
Thread Starter
iTrader: (4)
 
Mike454SS's Avatar
 
Join Date: Oct 2004
Location: Manchester, CT
Posts: 2,139
Likes: 0
Received 3 Likes on 3 Posts

Default

LOL...they were something like $320 a piece.



Quick Reply: Advanced Induction Heads/Cam LS3



All times are GMT -5. The time now is 01:57 AM.