L92 VVT dyno'd
 

Got the chevelle going and got it on the dyno for a tune. The car was on a mustang dyno btw.

Stock L92 short block, TSP CNC heads, Comp 156-403-13, 222/236,.566/.578, heads are also milled .035", intake has been opened up and ported.

Car made 440hp/407tq at 5900rpm. It's still got more in it too because the stock 31lb L92 injectors were at 95% duty cycle so we didn't spin it any more than 5900rpm. Need to get a set of 41lb LS3 injectors and get it back on the dyno, but i'm pretty happy with those numbers from a relatively tame combination.

Nice results from a mild cam and not pulling past 5900rpm! How's the torque look?

Solid numbers...congrats

Those are very good numbers, congrats!

Do you know what your CR is with the stock pistons and milled heads? Awesome results.

Very good numbers for the low rpm!!!