LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Dynamometer Results & Comparisons (https://ls1tech.com/forums/dynamometer-results-comparisons-65/)
-   -   HioCrew LBO LS1 hits the rollers: 371rwhp stock cam and heads (https://ls1tech.com/forums/dynamometer-results-comparisons/1880257-hiocrew-lbo-ls1-hits-rollers-371rwhp-stock-cam-heads.html)

TheeCamaroKid 09-10-2017 11:27 PM

HioCrew LBO LS1 hits the rollers: 371rwhp stock cam and heads
 
Local shop had a open dyno day, figured itd be a good time to make some pulls and see what the old girl makes, a few details about muh cah!

99 LS1, SE 1 7/8 LTs, SE TDs, ATI 10% UD pully, Fast92/92 from the legendary BigHammer, SLP Lid with a WIX filter and a SD tune from the streets by yours truly, With some help from Darth_V8r. Car has 4.10s, T56, 3500 race weight with driver and traps 115.6mph. Looking forward to breaking into the 11s as it sits.

Pulls where done on a dynojet and another Tech member ran his bone stock 99 M6 WS6 witth 70k miles and made a honest 295 HP..spot on for a early stick shift LS1 car. My first pull had a 14% CF, so the dyno was restarted, second pull had no correction factor and made a legit 371whp...the stock WS6 made its pulls 15 minutes after mine. AND NO, your LS6 intake and pace setter Y pipe cant do that!



https://cimg7.ibsrv.net/gimg/ls1tech...78ed7e2efa.jpg

lazerlemonta 09-11-2017 07:32 AM

Nice work OP these cars are still impressive for the few mods and results.

HioSSilver 09-11-2017 07:36 AM

That thang made good powers!

big hammer 09-11-2017 10:05 AM

Impressive work from an LBO setup!

G Atsma 09-11-2017 10:27 AM

Newbie question time- LBO?

TheeCamaroKid 09-11-2017 10:33 AM


Originally Posted by G Atsma (Post 19722438)
Newbie question time- LBO?

Low Bolt On as opposed to FBO or full bolt on

big hammer 09-11-2017 10:49 AM

You could push that up to 400+ yet too

98_WS6_M6 09-11-2017 11:36 AM

Nice results OP! Lots left to do too!

G Atsma 09-11-2017 11:48 AM


Originally Posted by TheeCamaroKid (Post 19722445)
Low Bolt On as opposed to FBO or full bolt on

Ah! Thank you! And now that I know that, I'm even more impressed! NICE job!

Jay-P 09-11-2017 08:46 PM

Beard power!

foxsl 09-19-2017 02:54 AM

At what could be the lowest reading dyno in the city, stock 2004 z06 dynod there at 371 rwhp. That's the 405 hp model that z06 guys say is more like 410-415 hp at the crank

big hammer 09-19-2017 10:36 PM


Originally Posted by foxsl (Post 19728084)
At what could be the lowest reading dyno in the city, stock 2004 z06 dynod there at 371 rwhp. That's the 405 hp model that z06 guys say is more like 410-415 hp at the crank

JayP's stock ws6 dyno'd 295 there so it should be around bang on

Darth_V8r 09-20-2017 07:22 AM

I though HioCrew only used happy dynos...

HioSSilver 09-20-2017 07:44 AM

May all the hiocrew dynos be happy!

big hammer 09-20-2017 08:11 AM

We make dynos happy?

G Atsma 09-20-2017 09:19 AM


Originally Posted by HioSSilver (Post 19728980)
May all the hiocrew dynos be happy!

May all the dyno'd hiocrew be happy!

TheeCamaroKid 09-20-2017 12:30 PM

:burn:

GMRL 09-20-2017 12:55 PM


Originally Posted by TheeCamaroKid (Post 19722187)
Local shop had a open dyno day, figured itd be a good time to make some pulls and see what the old girl makes, a few details about muh cah!

99 LS1, SE 1 7/8 LTs, SE TDs, ATI 10% UD pully, Fast92/92 from the legendary BigHammer, SLP Lid with a WIX filter and a SD tune from the streets by yours truly, With some help from Darth_V8r. Car has 4.10s, T56, 3500 race weight with driver and traps 115.6mph. Looking forward to breaking into the 11s as it sits.

Pulls where done on a dynojet and another Tech member ran his bone stock 99 M6 WS6 witth 70k miles and made a honest 295 HP..spot on for a early stick shift LS1 car. My first pull had a 14% CF, so the dyno was restarted, second pull had no correction factor and made a legit 371whp...the stock WS6 made its pulls 15 minutes after mine. AND NO, your LS6 intake and pace setter Y pipe cant do that!

https://www.youtube.com/watch?v=1mFUCJtdLOs

https://www.youtube.com/watch?v=eGkDoYedrqI

https://cimg7.ibsrv.net/gimg/ls1tech...78ed7e2efa.jpg

Great numbers man! You must of read my mind on your build. I just picked up a low mile stock 02 SS M6 and thats exactly what Im planning for it too. I do however want to send my stock heads to AI.

foxsl 09-22-2017 08:18 PM

Yup I'd say the speedfactor dyno is pretty accurate. It was Lingenfelters dyno at one point.

Tuskyz28 09-22-2017 08:23 PM

I look forward to seeing some track times out of these cars.


All times are GMT -5. The time now is 08:17 PM.


© 2019 MH Sub I, LLC dba Internet Brands