Dyno results 99 ws6 - twin Vs racing t3 gt3582 turbos Hey guys, figured I’d post up here besides my build thread for people that may be interested in these turbos. Had a few issues on the dyno but still made 680whp @ 5500 rpm and 10.0 afr. First pull I decided to spin it up to 7k to see what kinda power it was going to make I ripped a gate diaphragm. So I’m happy with that at such a low rpm and also fat. 19# 61/64 gt3582 billet wheel t3 .82ar Forged 348 - l33 block 4l80e with ptc single disk, unlocked and flashing around 5200. 8.8 rear rev9 intercooler https://cimg8.ibsrv.net/gimg/ls1tech...27f9ef399.jpeg |
good stuff! get that AFR fixed. |
Niiice! |
Originally Posted by ddnspider
(Post 20036326)
good stuff! get that AFR fixed.
Originally Posted by Mavn
(Post 20036340)
Niiice! |
Solid numbers man |
Just a little update from me. Car made 700+ and ran 10.1@136. Launched on 3# and hit the limiter hard on the 2-3 shift. 3800# car 5k d/a https://cimg5.ibsrv.net/gimg/ls1tech...645888b45.jpeg |
100rw just cleaning up the fuel |
30mph out the back, thats nice! Did you get these from VS Racing? |
What rpms are you getting full spool? Can’t tell from the dynograph |
Lots to gain there, fuel is in the dirt before its even making any jams. |
Originally Posted by Cwarta
(Post 20036299)
Hey guys, figured I’d post up here besides my build thread for people that may be interested in these turbos. Had a few issues on the dyno but still made 680whp @ 5500 rpm and 10.0 afr. First pull I decided to spin it up to 7k to see what kinda power it was going to make I ripped a gate diaphragm. So I’m happy with that at such a low rpm and also fat. 19# |
Originally Posted by subeone
(Post 20104298)
100rw just cleaning up the fuel no it needs to be richer. it's safer.... |
Originally Posted by liljayv10
(Post 20122100)
no it needs to be richer. It's safer.... hahahahahahahaha |
Lol ya I see a huge improvement in power going from like 10.5 to 11.5 |
All times are GMT -5. The time now is 05:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands