AS Stage 2 5.3's & TR 224 Cam Dyno Results
08-12-2004, 12:30 PM
#1
TECH Enthusiast
Thread Starter
Join Date: May 2002
Location: PA
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
AS Stage 2 5.3's & TR 224 Cam Dyno Results 02ws6ssicks post:
Absolute speed
Heads
Thunder racing Cam
Rapid Motorsports Tuning
All of these sponsors RULE!!!!
Made the trip to the dyno so mikey could work his tuning magic. He was able to squeak out all the car would give.
Peak hp 432 HP
peak TQ 410
I am very pleased. Not bad at all for a baby cam.
Great drive down, and back.The car is very responsive, with great street manners. BIG thanks again to mikey from rapid for taking care of me. He went above and beyond with his service.
I will try to post a graph soon!
Absolute speed
HeadsThunder racing
CamRapid Motorsports
TuningAll of these sponsors RULE!!!!
Made the trip to the dyno so mikey could work his tuning magic. He was able to squeak out all the car would give.
Peak hp 432 HP
peak TQ 410
I am very pleased. Not bad at all for a baby cam.
Great drive down, and back.The car is very responsive, with great street manners. BIG thanks again to mikey from rapid for taking care of me. He went above and beyond with his service.I will try to post a graph soon!
08-12-2004, 02:14 PM
#3
TECH Fanatic
iTrader: (3)
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
Awesome! Mikey reallys knows what he's doing. He's done 3 full tunes for me and went above and beyond his service every time including helping me to find a vaccum leak behind the motor. Throw out some more specs on the car and a graph.
Trending Topics
08-13-2004, 07:10 AM
#8
Great numbers, are those with the true duals? Last year I had a TR 224 cam, AS STG 2 241 heads, Jet Hot LT lid cut out and I only made 412hp & 396 tq.
What was your A/F and timing?
It almost sounds too good to be true with that cam... I'm jealous.......
What was your A/F and timing?
It almost sounds too good to be true with that cam... I'm jealous.......
08-13-2004, 08:55 AM
#10
Launching!
iTrader: (6)
Join Date: Oct 2003
Location: PA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys, these numbers are from my car (see sig). Needless to say I am very pleased with the results. This combination works very well. I'll try to post the graph in the near future, and get some track times posted
09-14-2004, 02:02 PM
#13
TECH Resident
iTrader: (2)
Join Date: Dec 2001
Location: CT
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02WSsicks
I tried to post it, but it said the file was too large??
jim@uscc-llc.com
09-15-2004, 04:28 AM
#14
10 Second Club
iTrader: (4)
Join Date: Nov 2001
Location: New to South Carolina
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Great numbers with a TR224 cam and Absolute heads.Those heads are outflowing that TR224 meaning if down the road you go with a bigger cam you can expect big gains.Enjoy your new set up.
09-27-2004, 05:33 PM
#18
TECH Fanatic
iTrader: (3)
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
Yea that's awesome! I wish my torque curve looked that nice. Mine has a flat spot from 3500-4200rpms where it only increases 5-6ft lbs. Whether this is due to the cats or the fact my PP heads are crap is up in the air. This has been noted by a few people now about the PP 5.3s.
09-27-2004, 05:45 PM
#19
Originally Posted by Ryan02SS
Yea that's awesome! I wish my torque curve looked that nice. Mine has a flat spot from 3500-4200rpms where it only increases 5-6ft lbs. Whether this is due to the cats or the fact my PP heads are crap is up in the air. This has been noted by a few people now about the PP 5.3s.
