Absolute 5.3 heads, TSP 231/237 Dyno results!
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Dover,De
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Previously I made 330rwhp with stock internals. I installed absolute stage 2 5.3l heads and Tsp 231/237 cam. I still have a stock LS1 intake and unported Tb plus the car still needs tuning but anyway it put down 423RWHP and 383RWTQ. It was still climbing when it hit the rev limiter at 6500. It would have been over 430 if I spun it a little higher. I am very happy with this setup. I will be taking it to the track sunday for the true test!
Trending Topics
#11
10 Second Club
iTrader: (5)
Join Date: Dec 2002
Location: Maryland
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats on the numbers
Hope to see you at the shoot out on the 18th
I picked up about 10-15 between the LS6 and TB.... get them on there
I am sure the those numbers are locked for those who asked being the tq was 40 less then the hp... in an unlocked state that would be switched.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
![Leghump](https://ls1tech.com/forums/images/smilies/LS1Tech/leghump.gif)
#15
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Dover,De
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Went to the track today. I couldn't get a good 60ft with these 16" Et Streets, sold my 15" slicks/skinnies. It seemed to trap good considering how it was so hot outside today.
60ft} 1.64
1/8} 7.39 @ 93mph
1/4} 11.57 @ 120mph
60ft} 1.64
1/8} 7.39 @ 93mph
1/4} 11.57 @ 120mph
#16
TECH Fanatic
iTrader: (16)
Join Date: Oct 2003
Location: Ruffin,N.C.
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
nice numbers! oh those 60' times arent bad at all. i wish i could get those times. the best 60' ive ever had were 1.83. oh well , after my new clutch goes in maybe i can launch it better.congrats
#19
TECH Veteran
iTrader: (1)
Join Date: Nov 2001
Location: Houston,TX
Posts: 4,167
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by MADCOW
Went to the track today. I couldn't get a good 60ft with these 16" Et Streets, sold my 15" slicks/skinnies. It seemed to trap good considering how it was so hot outside today.
60ft} 1.64
1/8} 7.39 @ 93mph
1/4} 11.57 @ 120mph
60ft} 1.64
1/8} 7.39 @ 93mph
1/4} 11.57 @ 120mph
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
You have a very stout setup there, just get that 60' down and you should have no problems getting a 10 sec pass when the better weather gets here, considering your car ran great stock internal.
#20
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Dover,De
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm thinking about getting a set of pro stars. I also need to get rid of this stock Ls1 intake and Tb.
I have Qa1's on the front. BMR LCA and panhard on back. Raceweight is 3350. It cut many 1.54-1.58 sixty ft's before the H/C. I'm going back to the track this sunday with a much better tune.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
I have Qa1's on the front. BMR LCA and panhard on back. Raceweight is 3350. It cut many 1.54-1.58 sixty ft's before the H/C. I'm going back to the track this sunday with a much better tune.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)