What kind of power should i expect???
#1
Banned
Thread Starter
iTrader: (-1)
Join Date: Sep 2004
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
What kind of power should i expect???
I have a 98 Z-28 a4, i'm having the ls1 rebuilt. It has a stock crank, stock rods, Diamond pistons, copper head gasket shims, 2002 ls1 heads, Comp 918 springs, ls6 intake, Thunder racing 224 224 112lsa, Kooks LT headers, Texas speed and performance true duels, ported throttle body, stock converter, stock rearend. Please give me a round about est. of the numbers i will turn out.
#2
It all depends on numerous things...Is the engine rebuilder boreing the block alot or just enough to clean up the cyclinder walls? Are the heads stock heads or have they been modified? What compression ratio? If you plan on racing the car alot, your not seeing your cars full potential without a converter. With stock 241 casting heads, normal 346 cubes, 10:1 compression ratio, and an a4 car id say any where from 370-385.
#3
Banned
Thread Starter
iTrader: (-1)
Join Date: Sep 2004
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
the head gaskets are supposed to increase the compression by one point, stock bore size. this car is my daily driver what size converter should i run, i'd like to keep the gas milage up. thanks
#4
The Precision Industries Vigi or Yank 2800-3200 would be fine as a daily driver...Some people daily drive a 3500-4000 stall though, its up to you...If it were me I would do a 3200-3500 as a daily driver...