New dyno results on my almost-stock 98 TA
 

Just got back from Jeff over at CAM

Made 297.2hp, 318.6tq with just a lid and a Spintech muffler(not a cat back, just the muffler)

Car was running really lean, but I figured I'd wait on the tune till I do the heads/cam. :)

What do you guys think for a stock LS1?

If you're not doing the heads/cam right away I think you should have let Jeff work his magic tuning your car. He found 15 horsepower across the board on my near stock 2000 Camaro SS A4 and 25 horsepower in the middle of the RPM band. I ended up with 328.9 through a PT4000 converter and a 12 bolt w/3.90 gears. I don't know how he can find horsepower on near stock combos but he can. What's your car run at the track, BTW? That'll actually tell me more than just what the dyno numbers do.

Very typical for a stock 98 LS1. Mine did 290 rwhp and 308 rwtq bone stock.

Using a horsepower calculator I should have between 300-310rwhp. Ive got minimal mods as well, basically lid and cutout.

Mine w/a lid and cut out did 316/341, but now for some reason after the cam my numbers arent too impressive,

Well, the heads are in the shop now, so the cam/heads are a winter project.

I need to get the car back to the track, last time I burned out a plug wire and ran a 9.01 1/8th. Barely made it home that day, too. Haha.

Can't remember my mph, but I think it was around 82 or so. I can;t find the slips after I moved a few months ago.