FMS NA 346 507rwhp!!!!!! TH400, 12 bolt, 28Ws!!!!!!
01-30-2006, 06:35 PM
#1
FMS NA 346 507rwhp!!!!!! TH400, 12 bolt, 28Ws!!!!!! I couldnt be happier right now!!!!!!!!!! I made the trip down to Futral Motorsports this weekend to get my lil 346 dialed in by Allan. I was expecting an honest 450rwhp out of this setup with my drivetrain..... Damn was I surprised!!!!
Engine is FMS 346, solid cam, LS6 heads, C12 fuel.
Drivetrain consists of Th400 w/ TCI 6200 8" converter, steel driveshaft, Strange 12 bolt w/ 4:88 gears, and MT 28x10.50x15Ws .
Engine spins to 8000rpm and makes power all the way to redliine!!!
507rwhp/414rwtq
Torque #s are a bit low due to the converter coming in so late. Still impressive to say the least!!!!
I have to think this is some kind of 346 NA record. I know Allan was making mid 500s in his car a while back, but that was through a Pro shifted 6spd...
Thanx again to FMS!!!! Those guys never seem to know the limit!!!!!!!! Using a 20% drivetrain loss which would seem about right with this drivetrain this lil stock cube engine is making 608 horsepower!!!!!
Heres a link to the graph .... Click on FMS 346 dyno.
http://community.webshots.com/user/cammin
Engine is FMS 346, solid cam, LS6 heads, C12 fuel.
Drivetrain consists of Th400 w/ TCI 6200 8" converter, steel driveshaft, Strange 12 bolt w/ 4:88 gears, and MT 28x10.50x15Ws .
Engine spins to 8000rpm and makes power all the way to redliine!!!
507rwhp/414rwtq
Torque #s are a bit low due to the converter coming in so late. Still impressive to say the least!!!!
I have to think this is some kind of 346 NA record. I know Allan was making mid 500s in his car a while back, but that was through a Pro shifted 6spd...
Thanx again to FMS!!!! Those guys never seem to know the limit!!!!!!!! Using a 20% drivetrain loss which would seem about right with this drivetrain this lil stock cube engine is making 608 horsepower!!!!!
Heres a link to the graph .... Click on FMS 346 dyno.
http://community.webshots.com/user/cammin
01-30-2006, 06:51 PM
#2
11 Second Club
Join Date: Apr 2005
Location: Tucson, Arizona
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
thats awesome!! what compression ratio are you runnin? i assume with that big of a stall converter you have a trans brake. you must be launchin at 5,500 rpm's
Trending Topics
01-30-2006, 09:05 PM
#13
Congrats on the power. You are really hauling the mail that's for sure. I'm a little perplexed about your correction factor though. In 60 degree weather, with 36% humidity at low alititude, most dynos will pull power away in their SAE correction (to the tune of .96-.97), but your's added to the output (1.01 correction). Maybe it's the whacked out 28.74 barometer reading that did it...must have gotten stuck when the last hurricane rolled through, LOL. Regardless, you motor is SICK and major props go out to you, FMS and whoever else was involved.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
I know you will have fun with it. She is one sweet looking car 
01-30-2006, 09:57 PM
#15
Thanx guys!!! I am quite impressed to say the least.
Patrick, Not sure on the correction factor, but I strapped the car down at the shop this morning to back up the #s made @ FMS. They were within 5 horsepower......
Allan, thanx for the kickass motor.... This thing sings to you @ 8k
BTW, the heads are Stage III Meaux/FMS Racing LS6 heads....
Patrick, Not sure on the correction factor, but I strapped the car down at the shop this morning to back up the #s made @ FMS. They were within 5 horsepower......
Allan, thanx for the kickass motor.... This thing sings to you @ 8k
BTW, the heads are Stage III Meaux/FMS Racing LS6 heads....
Originally Posted by Patrick G
Congrats on the power. You are really hauling the mail that's for sure. I'm a little perplexed about your correction factor though. In 60 degree weather, with 36% humidity at low alititude, most dynos will pull power away in their SAE correction (to the tune of .96-.97), but your's added to the output (1.01 correction). Maybe it's the whacked out 28.74 barometer reading that did it...must have gotten stuck when the last hurricane rolled through, LOL. Regardless, you motor is SICK and major props go out to you, FMS and whoever else was involved.
01-30-2006, 10:28 PM
#17
Originally Posted by Quickin
FMS engines usually dyno about 50 RWHP more than all the other dyno's, so you're right at the 450 RWHP you were hoping for.
j/k nice numbers
j/k nice numbers
