TTP S3 AFR 205 Heads & Comp 216/220 Cam, A4
 

This is a VERY mild combination, can barely hear a lope. Here are the details:

2002 Camaro SS, Stock 4L60E
TTP Stage 3 Port/Polished AFR 205cc Heads, 2.02/1.60
FAST 90mm Intake Port Matched
NW 90mm TB
Comp 216/220
SLP 1.85 Rockers
Corsa Pro-Series
Kooks 1 3/4 to 1 7/8 Stepped LTs w/ Catted Y-Pipe
18" Z06 Wheels
Vig 3600 Converter

Uncorrected numbers were 428rwhp/400rwtq

http://www.ttperformance.net/dyno/eric02som.jpg

I can't wait to drive it.....

Nice numbers for such a mild setup. Congrats!

Very impressive, should drive and sound like stock until you push the go pedal to floor!!!

Nice.....but dude, that cam is choking the crap outta that combo! Put something with around 230 intake duration in it.....it'll still idle nice, but probably make 40+hp more to boot.

Locked convertor I assume?

I know the cam is definitly the weak link, I figured I would try something a little different when I went with the rockers and 216/220 over 2 years ago. What I have enjoyed though is a very relible car, over 70 track passes and no problems, even with the stock rear. That's why I keep going back to TTP because of the good work, and the fact I have never had any problems with thier work. Next year maybe I will do a bigger cam, or maybe just go to a 395CI motor using the intake and heads I have now, don't know..

That was my first cam. It loved N2O too, got me in the 10's ;).

Dan

Awesome #'s for that small of a cam through an auto too. :)

Really impressive with that tiny CAM & A4 :)

peace

Awesome numbers...nice ride too, saw it Monday.

Great numbers for a stealth setup!

What kind of work was done to the AFR 205 heads?

good work.

this is the combo i would love to have but with a tr200 220 cam...nice power under the curve! expecially for an a4!

We were quite impressed with the combination. This just proves the quality of the AFR heads and our additional port/polish package. These are amazing numbers for a car that is turn-key start and barely sounds like a cam is in there. Most people think its a catback only car... until Eric hits the pedal :)

Whats the lift on the cam?

Look below for lift specs.

Can't go wrong with anything from TTP. If you live in the tri state NY area there's only one place you should go for honest, dependable, and consistent result. :)

Keep up the good work Matt.

If i remember right the Comp 216/220 has intake lift of .527, exhaust .534. With the 1.85 rocker that goes to .573 intake, .581 exhaust