I'm Stoked!!!
 

So i finally got to dyno the Z tonight at school, its a 99 z28, A4, 2.73 w/ lid, k&n and tune that i did myself, she put down 324.9 rwhp, not a bad start, o and it just turned over 70k last week when i went home.

Good numbers with A4 man now start modding that thing.

1st some gears and stall great mods for A4.

Very strong numbers IMO for a lid only car. Nice.

Yeah a stall is the best bang fot the buck with an A4. I picked up .5 in the 1/8 mile with the swap.

a stall and nitrous and be done with it!:D

put it on the track.

Yea i ran it at my local track last summer and the best i could get out of it was 13.8 at 103mph on bfg drag radials, but that was before the tune.

Gears will make all the difference in the world with that car. Get a M6 driveshaft and rearend and wake that bad boy up. The 2.73 cars need atleast a 3.42 and they came with steel driveshafts, get the AL one and the M6 rear and swap it out on a Saturday. Otherwise you will have to get either a spacer or gear made for a 2 series carrier.

I had 1.50 60' times with my 323 gear. I haven't had much seat time with my 3.42s the best I could do was 1.58 60'.

damn good numbers!