LS6 346 vindicator and bolt on's
 

Well today i got the old 98 to straightline performance For my Retune with my new header's 1 7/8's kook's and 4in mufflex, 42 pnd injectors, Z06 maf, And Ngk Tr6 plug's. Plus all the other mod's in my sig.

Well #1 Mike is a great tuner to work with he had alot going on when i showed up and alot of car's to take care of. But was great to me and so was everone else. Mike did his thing and reset all V block's. and got her ready to rip. Well after the 2nd pull he showed me the graph and he was like it like fuel well he upped the rpm and the fuel and let her fly and then there was the light:angel:
It put down 436 RWHP and 388 RWTQ

http://i275.photobucket.com/albums/j...h_100_0619.jpg

http://s275.photobucket.com/albums/j...t=100_0621.jpg

http://s275.photobucket.com/albums/j...t=100_0622.jpg

http://s275.photobucket.com/albums/j...t=100_0623.jpg

Fun! :thumb:

Congrats, that's strong!

arent those numbers kinda low considering you have the ls6 heads, ported fast 90, nw 90 tb, electric water pump etc?

my ms4 with all bolt ons minus electric water pump and with the stock ls6 intake and ported tb put down 431hp and 390 trq

no, those numbers are not low. this is a mustang dyno. numbers seem dead on. how do you figure the numbers are low?

to the op: how does the car drive with the 342 gears?

mike set this car up spot on it is really easy to drive and pull's very well i had alot of fun driving home to aurora.

s346k where in nap are you from i just moved to aurora- nap off 59 and 34.

yea and mike was really sure that if we let the car cool down a little more she would hit 440+ but we were out of time.

umm naptown as in indianapolis - souf siiieddeee

Nice numbers, congrats.

Very nice on a mustang dyno. Throw some real heads on there and that car will be strong as hell. I bet it sounds good. :nod:

Yea i am looking at the T.E.A Ls6 heads or trick flows but i like the price of the T.E.A's
and it sounds great

I would save up for the 215 TFS heads. A friend of mine had his Z06 built by vengeance with the vindicator, tfs heads, ported fast 90/90, electric wp, pulley, and full exhaust, and he did 520 to the tires. TFS heads are awesome.

Damn awesome numbers man on mustang dyno.

CONGRATS
I cant imagine what that car will do with a set of Ron's Trickflow 215.

215 do sound nice and the power is going to be close to 500 i hope if i was to run them but do you all think it will come close to or hit 500 with the 215 at a 59cc and flycut pistons ??????? or would i just piss money away for another few horses cuz the TEA LS6 phase 3 are a bad head and have some really good low lift #'s with flow and the price is so sweet i dunno what you guy's think?

why???????????????/
 

Why looks like the 243s are doin ther job damn well.....

nice #s most mustang dynos ive seen read 8-10% lower than dyno jets....

if i were to slap a big cam, it would definitely be the VINDICATOR!!

I would go w/ the TFS. From what i was told the TFS heads have more clearance and Ron recommended to mill .018 to bump up compression and it would be safe. So i'll see how that goes when i get everything done.