Who wants to guess what it will lay down on the dyno?
07-22-2012, 03:47 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Mar 2011
Location: GA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Who wants to guess what it will lay down on the dyno? -98 Z28 M6
-347ci 11.6:1cr
-PRC 2.5 5.3 heads milled to 58cc chambers.
-Ms3 cam
-ls6 Intake
-Ported TB
-4340 H beam rods
-Kooks 1 7/8'' Long tubes
-Tsp true dulls
-Diamond Forged flat tops with -2cc valve reliefs
-Ls7 lifters,
-New lifter trays
-MLS Cometic 40 Thou Head Gaskets
-Ported TB
-The gear box stage2 kit in T56
-410 gear
-347ci 11.6:1cr
-PRC 2.5 5.3 heads milled to 58cc chambers.
-Ms3 cam
-ls6 Intake
-Ported TB
-4340 H beam rods
-Kooks 1 7/8'' Long tubes
-Tsp true dulls
-Diamond Forged flat tops with -2cc valve reliefs
-Ls7 lifters,
-New lifter trays
-MLS Cometic 40 Thou Head Gaskets
-Ported TB
-The gear box stage2 kit in T56
-410 gear
Trending Topics
07-23-2012, 09:52 AM
#13
actually i will revise my previous number didn't realize you were still running ls6 intake. I'd say 450.
I put down 435 with those same heads unmilled and a little smaller cam w/92 Fast intake. Now this number was with a restricted ypipe setup so my TD's opened it up a little more.
I put down 435 with those same heads unmilled and a little smaller cam w/92 Fast intake. Now this number was with a restricted ypipe setup so my TD's opened it up a little more.
