H/C/I D1SC dyno predictions
#21
Launching!
iTrader: (4)
I'd guess 620whp to the wheels. I have a very similar setup, however through a built/stalled auto. My numbers were 598hp and 554tq to the wheels. (locked converter)
My setup: (8psi, 16* of timing and 11.2 AFR @ WOT)
Stock bottom end 346
- Ported 243 10.5.1 CR
- Fast 102
- NW 92 TB
- TSP 228R .600/600 112
- 1 3/4 BBK headers w/ catted Y
- E-cutout (open) w/ stock muffler/CME
- SD 60 lb injectors
- 10 bolt 3.23
- Built 4l60e w/ yank SS3600
- D1SC (8psi) w/ FMIC
- Snow stage 2 kit (50/50 mix)
My setup: (8psi, 16* of timing and 11.2 AFR @ WOT)
Stock bottom end 346
- Ported 243 10.5.1 CR
- Fast 102
- NW 92 TB
- TSP 228R .600/600 112
- 1 3/4 BBK headers w/ catted Y
- E-cutout (open) w/ stock muffler/CME
- SD 60 lb injectors
- 10 bolt 3.23
- Built 4l60e w/ yank SS3600
- D1SC (8psi) w/ FMIC
- Snow stage 2 kit (50/50 mix)
#22
I'd guess 620whp to the wheels. I have a very similar setup, however through a built/stalled auto. My numbers were 598hp and 554tq to the wheels. (locked converter)
My setup: (8psi, 16* of timing and 11.2 AFR @ WOT)
Stock bottom end 346
- Ported 243 10.5.1 CR
- Fast 102
- NW 92 TB
- TSP 228R .600/600 112
- 1 3/4 BBK headers w/ catted Y
- E-cutout (open) w/ stock muffler/CME
- SD 60 lb injectors
- 10 bolt 3.23
- Built 4l60e w/ yank SS3600
- D1SC (8psi) w/ FMIC
- Snow stage 2 kit (50/50 mix)
My setup: (8psi, 16* of timing and 11.2 AFR @ WOT)
Stock bottom end 346
- Ported 243 10.5.1 CR
- Fast 102
- NW 92 TB
- TSP 228R .600/600 112
- 1 3/4 BBK headers w/ catted Y
- E-cutout (open) w/ stock muffler/CME
- SD 60 lb injectors
- 10 bolt 3.23
- Built 4l60e w/ yank SS3600
- D1SC (8psi) w/ FMIC
- Snow stage 2 kit (50/50 mix)