Eastern Members CT, DE, NH, NJ, NY, MA, ME, MD, PA, RI, VT, VA, WV

Took my car out for a test ride....

Thread Tools
 
Search this Thread
 
Old 03-01-2010, 05:07 AM
  #1  
TECH Regular
Thread Starter
iTrader: (12)
 
C5kid's Avatar
 
Join Date: Mar 2003
Location: Hershey, PA
Posts: 453
Likes: 0
Received 0 Likes on 0 Posts

Unhappy Took my car out for a test ride....

Well yesterday I rolled the car outta the garage, left her warm up good and then went for a spin down my road.

Everything is mechanically sound, need to bleed the brakes again to get some of the small air pockets out, since I changed the lines & fluid.

There is just one problem... She got no spunk

I know it still needs alot of tuning work done to the VE table and spark tables. But it still shouldn't be this bad.

So I am kinda thinkin.... nitrous? Easy to install. I take that jungle gym of pipe work outta the front of the car. PUSH BUTTON POWER!!!!

Now that i got the forged bottom end she'll be good for a BIG shot, maybe a dual stage setup.

I didn't sleep at all last night. I have been debating it all night, paging through Jegs catalogs looking at setups.

Any advice on which kit? I would like to strat off w/ a 250 shot. I know the bottom end is good for it.

Last edited by C5kid; 03-01-2010 at 05:58 AM.
Old 03-01-2010, 05:40 AM
  #2  
10 Second Club
iTrader: (64)
 
dschmittie1's Avatar
 
Join Date: Aug 2005
Location: York, PA
Posts: 2,344
Likes: 0
Received 2 Likes on 2 Posts

Default

I would go straight to the 400 jets
Old 03-01-2010, 05:49 AM
  #3  
Banned
iTrader: (58)
 
DiabloFormula's Avatar
 
Join Date: Mar 2004
Location: Leola, PA
Posts: 756
Likes: 0
Received 0 Likes on 0 Posts
Default

nano!!!
Old 03-01-2010, 06:42 AM
  #4  
Teching In
 
YeloFevr's Avatar
 
Join Date: Apr 2007
Location: Mexico
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dschmittie1
I would go straight to the 400 jets
Big NAWZ

Old 03-01-2010, 06:59 AM
  #5  
On The Tree
 
ChefBRD's Avatar
 
Join Date: Jan 2003
Location: Lancaster, PA
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts

Default

The guy says Mikep is goin down! Screw that 1 power adder sheite.
Old 03-01-2010, 07:24 AM
  #6  
TECH Fanatic
iTrader: (12)
 
Zturd's Avatar
 
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes on 0 Posts

Default

I personally think you should get the dual tanks polished carbon fiber noided direct ported spyder veined testicular cancered piston popping dry quad stage wet shot with sort of independent fuel system with a bottle of meth hooked up to that with a nano to push it all through. Should make atleast 2000hp to the TARRRRRRRRRRRRR!!!!!!!!!!!!!! Plus it will only cost you the low cost $400 for all of that stuff used!
Old 03-01-2010, 10:36 AM
  #7  
FormerVendor
iTrader: (6)
 
Mike@HSW's Avatar
 
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes on 0 Posts
Default

how much are you looking to spend?
Old 03-01-2010, 11:09 AM
  #8  
TECH Regular
Thread Starter
iTrader: (12)
 
C5kid's Avatar
 
Join Date: Mar 2003
Location: Hershey, PA
Posts: 453
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Mike@HSW
how much are you looking to spend?
Money = NO OBJECT!!!... just need to crush that MikeP w/ my nitrous setup.
Old 03-01-2010, 11:18 AM
  #9  
Race your car!
iTrader: (50)
 
JL ws-6's Avatar
 
Join Date: Mar 2004
Posts: 15,420
Likes: 0
Received 18 Likes on 18 Posts

Default

Put a carb intake on it, plate and a fogger. Jet the plate to leave on then bring the fogger in .2 out. Jet the plate for about 200, fogger for about 250.

Standalone fuel system, everything low pressure, and take your time getting the tuneup right.. once it's right it will move.

Something tells me that you won't do it though.
Old 03-01-2010, 12:48 PM
  #10  
TECH Regular
Thread Starter
iTrader: (12)
 
C5kid's Avatar
 
Join Date: Mar 2003
Location: Hershey, PA
Posts: 453
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by JL ws-6
Put a carb intake on it, plate and a fogger. Jet the plate to leave on then bring the fogger in .2 out. Jet the plate for about 200, fogger for about 250.

Standalone fuel system, everything low pressure, and take your time getting the tuneup right.. once it's right it will move.

Something tells me that you won't do it though.
oh i'm serious... melba toast is goin to LOVE the edlebrock intake and 750 double pumper...

what kinda power can I expect to the TAAAHHHRRR???
Old 03-01-2010, 01:26 PM
  #11  
Race your car!
iTrader: (50)
 
JL ws-6's Avatar
 
Join Date: Mar 2004
Posts: 15,420
Likes: 0
Received 18 Likes on 18 Posts

Default

Old 03-01-2010, 01:28 PM
  #12  
TECH Fanatic
iTrader: (12)
 
Zturd's Avatar
 
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes on 0 Posts

Default

keep it up C5kid and you're gonna need an appology thread like Mr. MikeP had to and you might even get your friend card revoked!!!!!!!!!

Oh and dont forget to IPOD your nitrous system!!! pushes her all out with a nice note!
Old 03-01-2010, 01:40 PM
  #13  
10 Second Club
iTrader: (64)
 
dschmittie1's Avatar
 
Join Date: Aug 2005
Location: York, PA
Posts: 2,344
Likes: 0
Received 2 Likes on 2 Posts

Default

Damn. That is the second dazed and confused refference in 2 weeks. I am gonna have to sit down and watch that again now
Old 03-01-2010, 02:47 PM
  #14  
9 Second Club
iTrader: (10)
 
mikep2002's Avatar
 
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes on 0 Posts

Default

You fockers!!!!!!!! Whats everyone gunning for with there bottle builds now?
Old 03-01-2010, 03:15 PM
  #15  
Teching In
 
YeloFevr's Avatar
 
Join Date: Apr 2007
Location: Mexico
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mikep2002
You fockers!!!!!!!! Whats everyone gunning for with there bottle builds now?
9.99. Gonna put my stock manifolds back on too for the extra challenge
Old 03-01-2010, 04:29 PM
  #16  
9 Second Club
iTrader: (10)
 
mikep2002's Avatar
 
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes on 0 Posts

Default

I feeling the itch to hit the 1000K mark. I may do a shot. Going out tonight to find a bottle. I am not going down to the c5kid.

And I sure as hell aint going down to the redheaded step-child!!!!! 9.99 here I come...
Old 03-01-2010, 05:57 PM
  #17  
9 Second Club
iTrader: (10)
 
mikep2002's Avatar
 
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes on 0 Posts

Default

Well I broke the bank today... Yeppers I had to do it. Went over to delaware to avoid paying taxes and I got a deal on a NOS bottle setup 3bills daddy... Gonna get her opened up tonight take some pics and hopefully in a few days I understand all the hype about NOS...
Old 03-01-2010, 06:18 PM
  #18  
TECH Regular
Thread Starter
iTrader: (12)
 
C5kid's Avatar
 
Join Date: Mar 2003
Location: Hershey, PA
Posts: 453
Likes: 0
Received 0 Likes on 0 Posts

Default

MINE's on the way!!!!

Got a ZEX kit from JEGS!!!! i am goin to throw the biggest jets in that bitch... BANG 9.98!!!
Old 03-01-2010, 06:21 PM
  #19  
Teching In
 
YeloFevr's Avatar
 
Join Date: Apr 2007
Location: Mexico
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mikep2002
Well I broke the bank today... Yeppers I had to do it. Went over to delaware to avoid paying taxes and I got a deal on a NOS bottle setup 3bills daddy... Gonna get her opened up tonight take some pics and hopefully in a few days I understand all the hype about NOS...
I stopped by after work too and the guy behind the counter said that some big goofy guy was just there asking about MP3 players and iPods. Not sure what that's all about
Old 03-01-2010, 06:22 PM
  #20  
9 Second Club
iTrader: (10)
 
mikep2002's Avatar
 
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by C5kid
MINE's on the way!!!!

Got a ZEX kit from JEGS!!!! i am goin to throw the biggest jets in that bitch... BANG 9.98!!!
Nah I went with the original NOS if your going to do it do it right.... Let me get back to work on figuring this thing out.

Diablow I may need some of your knowledge to get this hooked up...



All times are GMT -5. The time now is 04:53 AM.