Dyno Day 6/11 - Worcester, MA
#1
Teching In
Thread Starter
Join Date: Jun 2005
Location: Easton, MA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Day 6/11 - Worcester, MA
I'm a newbie here but I frequent the LS1GTO site and wanted to extend an invitation to everyone here for a Dyno Day being held at New England Dyno & Tune on Saturday June 11th.
We should be starting around 9:30 AM.
Saturday, June 11th
New England Dyno & Tune
Lenora St., Worcester, MA
$65/car ($70 with Air/Fuel) up to 6 pulls
Noontime cookout (Burgers, Dogs, Chicken...)
I plan on dynoing my stock '04 GTO and my '70 GTO.
I am extending the invitation to other gearheads I know as well, feel free to do the same.
Please post a reply if you can make it or send me a PM.
Hope to see you there!!!
Thanks,
- Matt
We should be starting around 9:30 AM.
Saturday, June 11th
New England Dyno & Tune
Lenora St., Worcester, MA
$65/car ($70 with Air/Fuel) up to 6 pulls
Noontime cookout (Burgers, Dogs, Chicken...)
I plan on dynoing my stock '04 GTO and my '70 GTO.
I am extending the invitation to other gearheads I know as well, feel free to do the same.
Please post a reply if you can make it or send me a PM.
Hope to see you there!!!
Thanks,
- Matt
#4
Teching In
Thread Starter
Join Date: Jun 2005
Location: Easton, MA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Directions
To New England Dyno:
Take exit 10A off the Mass Pike. After the toll booths you will
come to a light where you must go left or right, go right and get
immediately in the left lane. The left lane heads directly to 146 North.
Once on 146 North take your first exit which is labeled
Quinsigamond Village. At the end of the ramp turn left and go to the
stop light. Take a left at the light and go straight through the next
set of lights. You are now on Millbury Street.
There are three driveways/roads on the left side of Millbury
Street. The first is just past a large building and is the entrance to
the inter-modal container drop-off area. The second is the entrance to
Aggregate Industries rock crushing plant and the third left is Lenora
Street.
The sign for Lenora Street is well hidden behind 2 telephone
poles so you will drive right by. When you get to the train tracks you
went too far, turn around and come back 1/8 mile and look for Door
Systems. You can see the Lenora Street sign on the return trip without
issue.
The dyno is the second building on the left on Lenora (7 Lenora
Street to be exact).
Hope to see you there!
Take exit 10A off the Mass Pike. After the toll booths you will
come to a light where you must go left or right, go right and get
immediately in the left lane. The left lane heads directly to 146 North.
Once on 146 North take your first exit which is labeled
Quinsigamond Village. At the end of the ramp turn left and go to the
stop light. Take a left at the light and go straight through the next
set of lights. You are now on Millbury Street.
There are three driveways/roads on the left side of Millbury
Street. The first is just past a large building and is the entrance to
the inter-modal container drop-off area. The second is the entrance to
Aggregate Industries rock crushing plant and the third left is Lenora
Street.
The sign for Lenora Street is well hidden behind 2 telephone
poles so you will drive right by. When you get to the train tracks you
went too far, turn around and come back 1/8 mile and look for Door
Systems. You can see the Lenora Street sign on the return trip without
issue.
The dyno is the second building on the left on Lenora (7 Lenora
Street to be exact).
Hope to see you there!
Last edited by connoman59; 06-09-2005 at 10:54 AM.