Bob2of3

iTrader: (11)

Alright I'll try this time to list everything

2000 Z/28 Hardtop NBM PWR Windows and Seat, traction Control, GSCs, 3.23stock(3.42 now) CD Monsoon Radio A4

This car is garage kept, has 4512 miles on the clock, maybe got rained on once or twice, Have 99% of time slips and window sticker. Was only driven hard at the track

List of parts

Aftermarket
JPR Stage 2 HVLD Heads
Thunder 224/224 cam
Comp hardened 7.35 pushrods
LS6 Intake
Home Ported MAF, TB
SVO 30lb injectors
MAFT
DirectFlo Lid
JPR Electric Water Pump
Hooker LT Headers
FTRA
ARP Main Stud Kit
ARP Rod Bolts
Clevite main and rod bearings
Total Seal Piston rings
SLP double Roller timing chain
ASP Underdrive pulley
MSD Wires
LS1 Edit
Autotap
Schubeck Lifters
Strange lightweight front brakes
QA1 Front/rear Shocks and front springs(these are not the R's)
PA Racing CM K-member and Lower A-arms
BMR Upper A-arms
Hurst Line Lock
B&M Trans Cooler
Yank Thruster Pro 4500 converter
Deep Trans pan
BMR D/S Safety Loop
T/A Rear Cover and stud kit
Helms Manuals
Energy Suspension Poly motor mount and torque arm bushing
Speed inc Billet fuel rails
aeromotive A1000 fuel pump, regulator and fuel filter
Weld 15x3.5 Draglites and Magnums
Weld 15x8 Draglites
MT ET Drags
MT sportsman front runner 8-ply

I have about 99% of everything I took off the car along with stock parts from 2 engines f-body and a Y body

I was able to take some pictures but I don't know if there is any kind of limit for posting them directly in this post so here is the link http://community.webshots.com/user/bob2of3

Now remember bring a u-haul and a flat bed trailer and $9000 in cash or certified bank check

LAter

chevytat2

are you selling the parts seperatley?

Slowhawk

iTrader: (12)

I might be interest in everything except the engine stuff

Bob2of3

iTrader: (11)

I'd rather try to sell everything at once. But if nothing happens then I'll see if building the car or selling the parts makes the most sense for me

LAter

Demonicbird00

iTrader: (17)

WOW

I could have a Field Day at your house!!!

im around the corner from you i work in Pitman

Id be interested in the k-memeber and upper and lower A-ARMS if your willing to part

-Brandon

TheSilverOne

iTrader: (22)

Ftra?

davered00ss

iTrader: (4)

Cam?

squirrel masta

slicks and skinnys

lilstephsls1

iTrader: (5)

definitely interested in the springs, shocks, and maybe brakes if you are willing to part these...
maybe i overlooked it, but do u have an aftermarket driveshaft too?

lilstephsls1

iTrader: (5)

and maybe the electric water pump

theblur98ss

iTrader: (71)

What times did it run? Dyno numbers? What exhaust? Street legal?

JL ws-6

iTrader: (50)

If the car was together, you and I would be talking. If you want a hand putting that back together this fall ( after september.. I'm getting married then ) I"d be willing to come down for a weekend or 2, you buy the beer and food, and give me a couch to sleep on for a nite.. nothing I hate seeing more thena guy getting out because of a lack of time.

Bob2of3

iTrader: (11)

I'm about to start parting out so if you interested you better speak up

LAter

It figures that the computer acts up this week when I finally got something going on in here again

ace68

iTrader: (15)

Nice front suspesion parts, springs-shocks & a- arms, how much?

11SECSS

iTrader: (199)

I'm interested in the helms and that weather station and the fuel rails...........

chevytat2

how much for the qa1 front shocks,kmember,uppers and lower a arms?

Slowhawk

iTrader: (12)

Still interested in the rolling chasis,tranny.That includes the tubular front setup

JL ws-6

iTrader: (50)

The heads, what did they flow, what casting # are they, what springs are on them?

Humvee z28

prices on LS6 intake, LT headers (does it have ORY or catted?), line lock, DS loop, T/A cover and stud kit