RamAir02TA77

iTrader: (3)

I was at englishtown tonite didnt see to many f bodys but there was a few fast vettes I was there in my beater 88 mustang ended up running a 13.5 @ 99 missing 3rd bogged to a 1.85 60 ft I dumped it at 5k next time ill go higher the other 2 runs were junk as the 2nd run I tryed slipping the clutch and it bogged hard to a 1.9 and the last run I tryed a straight dump at 6.5k and it didnt hold at all. All in all it was fun running my beater 5.o I believe the car has a leaky head gasket which I knew and the valvesprings I think are shot but I have another motor that I plan on putting in eventually thats going to be pretty similar to this one with the addition of a cam and valvesprings and hopefully the motor I picked doesnt have a busted head gasket haha.

YO-EL

iTrader: (6)

Me & my buddies Joe LaTona (2000WhiteC5) & Rob Farley (98 Indy Pace Car)
were there..

I ran 10.74 (2000 Pewter C5)
Joe (White C5) ran 10.7x's
Rob ran a 10.91

We ran in Gamblers...

RamAir02TA77

iTrader: (3)

Yea I remember seeing and hearing some of those vettes they sounded good. You guys still running electronic 4l60e's if so they sounded like there were shifting good. What kinda mods you guys got done?

Red97Z

iTrader: (22)

I was there with a few friends, didn't race. Anyone see the pewter vette that broke his transmission?!

jared1993

iTrader: (2)

I was there with my dad and brother. My bro had the black notch w/ the welds and my dad had the white notch 9.60's and 1.38 60' (all motor)

http://www.youtube.com/watch?v=wdlcXVtyhLs

At cecil: Carb needs to be rejetted...you can hear it breaking up on the 1-2 shift on the 1st and 4th pass

YO-EL

iTrader: (6)

Us Vette guys are all N/A heads/cam cars..

jared1993

iTrader: (2)

Yeah I know....got to love the all motor cars
I met Rob. He is friends with Billy parson (Who works for No limit performance, who built my dad's car)

RamAir02TA77

iTrader: (3)

Wow they run good are you all still running the 4l60e's? Either way them trannies sounded like there bangin the gears good. Also are all your cars done by cartek those cars seem to always run good times.

WS6TransAm01

iTrader: (13)

I was planning on going, but byt the time I was ready, it was way to late... oh well..

YO-EL

iTrader: (6)

Yes, my car & Joe's were done by CARTEK.

Rob used another shop.

RamAir02TA77

iTrader: (3)

Yea all those cars run good they sound mean. I dont really go to englishtown much it was just the closest track open and I wanted to see what this beater 5o did.

damon_Z

I was there in my bone-stock, fully loaded, Monterey Red Metallic 2006 C6 with the A6 and Z51 suspension. I ran twice and didn't do that well, but it was nice to see that race weight (with me in it) at 3,418 lbs with a less less than half tank of gas. Were we running against the wind?

RamAir02TA77

iTrader: (3)

Not sure how was the c6 running? I should of weighed my 5o.

damon_Z

Not too good. Got two runs. The best run was a 13.465@107.50 with a 2.164 60 foot time. Even if my launches were a lot better, there's no way I could have hit 12's and that's what I was expecting.

RamAir02TA77

iTrader: (3)

Thats not a bad mph if you get that 60ft down alittle bit it will probably go 12's.