Cool track pic
#7
Well it's not that the tranny won't take it but the built one I got never shifted right from day 1. I'd love to go 4l80, but I don't have the $ for that right now. I'd like to swap converters and do a Fast setup over the spring, then I'll revisit the tranny issue. Who knows maybe when I do my converter swap the vendor would be willing to take the tranny back for a look over. The car drives fine on the street it's now a WOT issue only.
Trending Topics
#11
JL, I'd be willing to bet it has something to do with the seperator plate or VB. You see the the 1st issue I had was no 1-2 shift, at all times WOT, and even when not at WOT till the tranny warmed up.
I swapped the VB/Plate and now 1-2 is fine but 2-3 bangs the limiter at WOT. I know it's not tuning and I am sure it's related to line pressure, in terms of the separator plate hole, or maybe the servo getting washed, I dunno something like that.
My other option...I got a VB w/ a trans-go on it from my factory tranny and a separator plate I drilled myself. That tranny shifted awesome. I am sure the vendor would give me grief about doing that and It's just a shot in the dark anyways. I've been trying not to worry about it this year as I have only taken it to the track once.
#19
Race your car!
iTrader: (50)
I think every tuner would appreciate it.
If there's a reliable way to have a manual valve body on one of those tranny's... I'd get to that right quick. A good tach/shiftlight and you'll hit the shift points every time no problems I'm sure of that, and you can keep the rpm's low when driving around town shifting it early too, probably get better gas mileage that way too I bet.
If there's a reliable way to have a manual valve body on one of those tranny's... I'd get to that right quick. A good tach/shiftlight and you'll hit the shift points every time no problems I'm sure of that, and you can keep the rpm's low when driving around town shifting it early too, probably get better gas mileage that way too I bet.