Big Thanks to Jeremy Framato and Fasterproms on ECU tuning.
10-19-2012, 03:30 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2010
Location: Palmetto, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Big Thanks to Jeremy Framato and Fasterproms on ECU tuning. Hello all,
I won't go into a lot of detail as I don't want this to sound like a paid advertisement for one of the sponsors here, but I want to convey how Jeremy went above and beyond to make things right for my father on a build.
My father is building an 2003 S-10 extend cab, but doing a conversion to swap a 2011 - 4.8L with a 6L90E into the truck out of a GMC van salvage with ECU and all wiring. He's been working on the conversion for the last couple of months. Initially he did a mail order tune through Jeremy Framato as the motor was staying "mostly" stock, and the trans wasn't being touched. He was having fuel issues and the configuration would not turn over. After a couple fuel pump replacements and a bunch of emails and calls with Jeremy, Jeremy then stopped by my father's shop (100 or so miles away) to re-program the ECU, and now it's running great!!!
Anywho, I just wanted to give a BIG thanks to Jeremy, and let him know he will have all of my ECU programming business from now on. It's hard to find people in this day and age that will go that far above and beyond like that.
Sincerely,
David
I won't go into a lot of detail as I don't want this to sound like a paid advertisement for one of the sponsors here, but I want to convey how Jeremy went above and beyond to make things right for my father on a build.
My father is building an 2003 S-10 extend cab, but doing a conversion to swap a 2011 - 4.8L with a 6L90E into the truck out of a GMC van salvage with ECU and all wiring. He's been working on the conversion for the last couple of months. Initially he did a mail order tune through Jeremy Framato as the motor was staying "mostly" stock, and the trans wasn't being touched. He was having fuel issues and the configuration would not turn over. After a couple fuel pump replacements and a bunch of emails and calls with Jeremy, Jeremy then stopped by my father's shop (100 or so miles away) to re-program the ECU, and now it's running great!!!
Anywho, I just wanted to give a BIG thanks to Jeremy, and let him know he will have all of my ECU programming business from now on. It's hard to find people in this day and age that will go that far above and beyond like that.
Sincerely,
David
10-20-2012, 03:53 PM
#3
TECH Enthusiast
iTrader: (5)
Join Date: Dec 2005
Location: Lake Mary, FL
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
he is the best, hands down! My bone stock motor is running 11.60's thanks to him, and all of my friends are tuned by him as well. I will never use another tuner!
10-23-2012, 11:56 AM
#7
10 Second Club
iTrader: (27)
Join Date: Mar 2009
Location: Kissimmee, FL / Vienna, VA
Posts: 810
Likes: 0
Received 1 Like
on
1 Post
I ran his SD tune for quite a while with no issues. Ended up going 10.1's@131 on motor with my stock bottom end LS1. I also had my intake ported by him which worked really well for the price he charges. I had no issues with the tune it idled awesome and drove well on the street.
Trending Topics
10-23-2012, 12:47 PM
#8
Hey Roy...hope all is well on the other side.
Roy is a great guy...bearly knew him but any time I would stop by his shop in Ft. Myers, he would stop what he was doing and answer any question I may have had @ N/C
Thanks man
Oh... and Jeremy is awesome and did me right.
Roy is a great guy...bearly knew him but any time I would stop by his shop in Ft. Myers, he would stop what he was doing and answer any question I may have had @ N/C
Thanks man
Oh... and Jeremy is awesome and did me right.
Last edited by ragtopz28; 10-23-2012 at 12:49 PM. Reason: ADD
