10.800 @ 126.57 from the almighty LT1!!!!
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
10.800 @ 126.57 from the almighty LT1!!!!
Ran 10.800 @ 126.57 at Orlando speed world Friday night. Car is a 97 firebird formula with a stock short block with le heads and a cc306 cam and 150 shot. Hope to put a trans brake in soon and go low to mid 10's
Trending Topics
#9
11 Second Club
iTrader: (1)
Join Date: Jul 2007
Location: cocoa
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Nice job! I may have to step my game up. I went 11.1@118 with a hot cam and out of the box dart pro1's on a 100 shot there a couple weeks ago. Good to see there's some local compition. Ill be back out there in a few weeks working out a few bugs
#10
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Hey cgperformance1320 I live in Cocoa too, I went 11.01 @ 124.56 a few months back on a 100 shot. I think the car will go 10.60's with a better 60' seeing how I trapped 126+ mph with a 1.52 60'
Maybe if I get the 60' down to a 1.4x it will do it. I also think I can put some more timing back in it and it might pick up a bit.
Maybe if I get the 60' down to a 1.4x it will do it. I also think I can put some more timing back in it and it might pick up a bit.
#11
11 Second Club
iTrader: (1)
Join Date: Jul 2007
Location: cocoa
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
That's good mph. I'm running br7ef's and 110 with 4 degrees pulled out for the 100shot . im going to put some timing back in mine i would like to get it in the 10's on the 100 before I go up on the nitrous at all. It's awesome to see another lt1 holding it down.
#12
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Im running autolite 103's and run a stand alone fuel system for the nitrous, with 110 in the cell and pump gas in the cars tank. I spray through a fogger nozzle and pull 6 degree's of timing.
#14
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Im running a worn out set of m/t 28x10.5 et slicks, thinking that a 27 inch tall et street might help me run a little quicker seeing how I am running a 3.73 gear in the 12 bolt. Maybe it will help the 60' on the launch.
#18
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I have been running 15 psi in the slicks and it seems to like that best, I think the 60' will get better with new DR's seeing how the 28x10.5's are mounted on a 8 inch wide wheel and the tire has less contact on the ground due to the rim. idk we will see when I get a 255/60/15 ET streets, I might lower the window switch to 3000 rpm's from 3500 rpm's to get the car moving sooner.
#19
10 Second Club
iTrader: (3)
I have been running 15 psi in the slicks and it seems to like that best, I think the 60' will get better with new DR's seeing how the 28x10.5's are mounted on a 8 inch wide wheel and the tire has less contact on the ground due to the rim. idk we will see when I get a 255/60/15 ET streets, I might lower the window switch to 3000 rpm's from 3500 rpm's to get the car moving sooner.
Yes, lower the activation rpm to 3000
#20
Staging Lane
iTrader: (10)
Join Date: Mar 2009
Location: ORLANDO .FLORIDA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Were going to get this into the 9ns .It has it in it 200 shot and a few ajustments .Yes i said it 9ns ..OL mightymouse is faster than a neon full of ricers being run off a cliff with no bottem Yes its that fast..LOL