LT1/SBC valvetrain stuff cam, rrs, springs etc etc
01-03-2006, 09:02 PM
#1
On The Tree
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Location: Miami, Floor-it-a
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
LT1/SBC valvetrain stuff cam, rrs, springs etc etc Up for grabs is a whole complete brand new valve train at a low low price of $750 plus shipping.
Originally bought for an aluminum head LT1 cam setup. My buddy ended up wrecking the car, now the parts are for sale.
Over $1400 worth of stuff
Heres what is included:
Click on the pics for high res.
ARP Cam Bolts Part Number # 300 - 1001
ARP Hex HeadBolts Part Number# 134 - 3601
ARP 12 point Intake Manifold bolts Part Number # 134 - 2101
ARP Oil Pump Driveshaft Part Number # 134 - 7901
A must have since the stock couple is PLASTIC!
ARP 7/16th Rocker Arm Studs Part Number # 134 - 7103
CompCam/Combination Motorsports Hydraulic Roller Custom Grind Duration: 224/236 @ .050"
Lift: .536/.556" with 1.6 Roller Rockers
LSA: 114 + 4 degrees advance built in
Lobes: 3314S/3316S
I made 35x/38x with this same cam with iron heads stock valves.
CompCams Superlocks 10 degree +.050" locks Part Number# 614-16
CompCam Beehive 10 degree Retainers PartNumber# 795-16
CompCam Beehive Spring Seats Part Number# 4705-16
Originally bought for an aluminum head LT1 cam setup. My buddy ended up wrecking the car, now the parts are for sale.
Over $1400 worth of stuff
Heres what is included:
Click on the pics for high res.
ARP Cam Bolts Part Number # 300 - 1001
ARP Hex HeadBolts Part Number# 134 - 3601
ARP 12 point Intake Manifold bolts Part Number # 134 - 2101
ARP Oil Pump Driveshaft Part Number # 134 - 7901
A must have since the stock couple is PLASTIC!
ARP 7/16th Rocker Arm Studs Part Number # 134 - 7103
CompCam/Combination Motorsports Hydraulic Roller Custom Grind Duration: 224/236 @ .050"
Lift: .536/.556" with 1.6 Roller Rockers
LSA: 114 + 4 degrees advance built in
Lobes: 3314S/3316S
I made 35x/38x with this same cam with iron heads stock valves.
CompCams Superlocks 10 degree +.050" locks Part Number# 614-16
CompCam Beehive 10 degree Retainers PartNumber# 795-16
CompCam Beehive Spring Seats Part Number# 4705-16
01-03-2006, 09:03 PM
#2
On The Tree
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Location: Miami, Floor-it-a
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
CompCam Beehive Valve Springs Part numbe# 26915-16
Crane Gold Race 1.6 Roller Rockers for 7/16th stud Part Number# 11755 - 16
2 NorthStar Coils and 2 ballast. 1 resistor/ballast has a broken connector but works. all you need is 2 more coils to compelete this coil setup.
Delteq Opti Direct Module. Cost $200 alone brand new. This is the Brain. All you would need is the wiring harness, bracket to mount the coils, and spark plug wires. I was quoted $2xx for everything else.
Felpro Headgaskets .039" Part Number# 9966 PT
Felpro ThrottleBody Gaskets, injector O-rings, misc
FelPro Timing Cover Set Part Number# TCS 45956
Isky Adjustable Guide Plates Part Number# 200 - AGP
These are completely adjustable, unlike those GM/comp/crane pieces which never seen to work right.
Ferrea Valves 2.02/1.57* valves
Not sure what part number they are. I believe they are stainless steel.
And last but not least a complete intact Opti Harness.
I just went on summitracing and I entered all the partnumbers I have, and i came out to:
***************$1064******************
That is without:
So you are saving at least $500.
All parts are Brand New unless noted $750 plus shipping
Paypal Perfered
Crane Gold Race 1.6 Roller Rockers for 7/16th stud Part Number# 11755 - 16
2 NorthStar Coils and 2 ballast. 1 resistor/ballast has a broken connector but works. all you need is 2 more coils to compelete this coil setup.
Delteq Opti Direct Module. Cost $200 alone brand new. This is the Brain. All you would need is the wiring harness, bracket to mount the coils, and spark plug wires. I was quoted $2xx for everything else.
Felpro Headgaskets .039" Part Number# 9966 PT
Felpro ThrottleBody Gaskets, injector O-rings, misc
FelPro Timing Cover Set Part Number# TCS 45956
Isky Adjustable Guide Plates Part Number# 200 - AGP
These are completely adjustable, unlike those GM/comp/crane pieces which never seen to work right.
Ferrea Valves 2.02/1.57* valves
Not sure what part number they are. I believe they are stainless steel.
And last but not least a complete intact Opti Harness.
I just went on summitracing and I entered all the partnumbers I have, and i came out to:
***************$1064******************
That is without:
- Shipping
- Coils
- Ballast
- Delteq module
- Valves
So you are saving at least $500.
All parts are Brand New unless noted $750 plus shipping
Paypal Perfered
01-03-2006, 09:22 PM
#4
On The Tree
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Location: Miami, Floor-it-a
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i know... i've been reading this board for almost 2 years, even though i don't have an Lsx based anything....
I'm on a lot of local boards.
most of the Fbody guys know me as NorySS.
I'm on a lot of local boards.
most of the Fbody guys know me as NorySS.
