motor and trans for sale..
#1
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Oct 2003
Location: apoopka, fl
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
motor and trans for sale..
ok its time for the new parts so here we go..
i have a stock shortblock out of a 02 car.. has just shy of 60k. on it now..
went through it about 12k ago.. got new pazma moly rings.. gappped loose for spray and clevite 77 bearings.. the rods were "race prepped" and the pistons were coated..
ARP rod bolts
OEM MLS 6.0 head gaskets..
patriot 5.3L heads.. the true #'s on which are known only to me and patriot..but they perform very well
lunati 242/242 595/595 cam
this motor has seen a good amount of nitrous and loves it.. both compression and leakdown come back almost perfect.. if the purchaser is interested i will let you go in with the borescope and look around yourself..
patriot gold springs..
hardened PR
comp R rockers
Motor has made 442 to the wheels on NLP's dyno which is known to read low.
has put over 615HP to the wheels on the jug..
i honestly don't know what the motor is worth so i'm gunna put 5k$ OBO*
also a built T56 done buy a local guy here..
supposed to have carbon synchro's upgraded sliders and forks..
however i didn't watch the parts go in.. but i trust him
comes with pro 5.0 power tower
all hydraulics and center console and pedals
slave has a SLOW leak.. and the spec III is also included..
its got a good # of miles but it has never slipped on me
1350 OBO*
Thanks for lookin
Mike
* means MAKE ME AN OFFER i'm very open and have run out of funds for the new motor..
i have a stock shortblock out of a 02 car.. has just shy of 60k. on it now..
went through it about 12k ago.. got new pazma moly rings.. gappped loose for spray and clevite 77 bearings.. the rods were "race prepped" and the pistons were coated..
ARP rod bolts
OEM MLS 6.0 head gaskets..
patriot 5.3L heads.. the true #'s on which are known only to me and patriot..but they perform very well
lunati 242/242 595/595 cam
this motor has seen a good amount of nitrous and loves it.. both compression and leakdown come back almost perfect.. if the purchaser is interested i will let you go in with the borescope and look around yourself..
patriot gold springs..
hardened PR
comp R rockers
Motor has made 442 to the wheels on NLP's dyno which is known to read low.
has put over 615HP to the wheels on the jug..
i honestly don't know what the motor is worth so i'm gunna put 5k$ OBO*
also a built T56 done buy a local guy here..
supposed to have carbon synchro's upgraded sliders and forks..
however i didn't watch the parts go in.. but i trust him
comes with pro 5.0 power tower
all hydraulics and center console and pedals
slave has a SLOW leak.. and the spec III is also included..
its got a good # of miles but it has never slipped on me
1350 OBO*
Thanks for lookin
Mike
* means MAKE ME AN OFFER i'm very open and have run out of funds for the new motor..
#7
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Oct 2003
Location: apoopka, fl
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
ooops yeah i meant 00.. i've had a few pms and evey one has been told they are more than welcome to come drive it.. she hadn't been started in almost a week and she fired right up last night..
the beauty of dual yellow tops
the beauty of dual yellow tops
Trending Topics
#8
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
what's the new setup? lemme guess 408 with a bunch of spray?
so what does "race prepped" rods mean? Are these are stock rods? are they shot peened?
pistons are still the stock cast pistons but with what a swain coating? can you be more specific?
so what does "race prepped" rods mean? Are these are stock rods? are they shot peened?
pistons are still the stock cast pistons but with what a swain coating? can you be more specific?
#9
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Oct 2003
Location: apoopka, fl
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
the rods are chriogenthefuckever treated.. and the pistons had the coating added to the sides to do away with the pistonslap.. and some sort of antidetonation coating on the top.. i cannot acount to its worthyness as the place in cocoa that did it is now out of business.. but it has benn putting up with everything i have given it for a long time..
#13
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Oct 2003
Location: apoopka, fl
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
i dunno if it'll be turbo.. i would like it to be but the idea of a F1 just sounds cool as hell.. if i do a turbo setup it will be a custom setup one off deal..
Mike
Mike
#18
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Oct 2003
Location: apoopka, fl
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02 Pewter LS1
He goes for a ride in a 4.6 2 valve mustang with a blower that runs 12's but it sounds cool. I guess I should go for a ride and maybe it would change my mind.
your just mad cause i'm faster.. BIATCH.. pewter looks good in the rearview..
no actually i'm itching for something different.. i want more power.. and i want it there ALL the time.. with a bit extra for fun sometimes..
see ya at doubles..
Mike