jeff5076

looking for a shop around the tampa/new port richey/ hudson area that does them?


and if anyone has these...pics? thanks.

camar0corey

iTrader: (22)

Good luck on any shops in Hernando/Pasco doing it. Most of them looked at the underside of my car and told me I was nuts.

jeff5076

really? yea spring hill sucks.. lol i just want some exhuast or something, im sick of having a stock car! lol

396D1SS

iTrader: (21)

if a shop thinks its nuts to put true duals on a f body then i would not trust them doing exhaust work on my car anyways.

It's a test....

ssblackss00

iTrader: (14)

I had a shop that did mine he did an ok job I dont like the mufflers or the tips he put on but it was the only place that would do it and i didnt care what he put on for now i just need some to hold me over till I get my cme, anyways it was a place over off of gandy pm me for more info if you would like it. he did 3 off the header into the x then 2 1/2 over axle then glass (dont get them, get the magnaflow 10416) and that was with a bmr pan hard relocation bracket. well hope that helped a lil lmk

camar0corey

iTrader: (22)

It was a well known shop for custom work, they didn't think much of the slp subframe connectors and spohn crossmember mounted torque arm. Then I got to thinking that my exhaust would be stupid low looking at it also. I'm just going to go with a single 4" when my new engine goes in. If the owner was there he might have said he could do it, but his kid's eyes about bugged out when I told him what I was thinking.

At least on a stock car you don't have any stuff in your way, I'm running the double diamond SFC's and a chassis mounted T/A so I got stuff in the way under there.

JEB99TA

iTrader: (32)

I've found a lot of shops won't do tru duals unless unless you have CATS on your car. Good luck finding someone in your area. Were you looking at a full tru dual setup out the back or chopped before the axle with turndowns?

jeff5076

im thinking choped before the axle.

Fonzi383

iTrader: (7)

Go with texas speed dyno max bullets sounds great on my 383 and i installed myself.

somws6bird

yeah plus one for the TSP true dual system, Ive heard good stories of people with the system, also go for the dynomax bullets or the sweet thunders. I ordered mine with the sweet thunders and can't wait to get it on my car.

Fonzi383

iTrader: (7)

Thunders are louder than bullets mine keep getting louder thoe I love them fit great.

Corvettekid82

iTrader: (20)

I went with 3inch all the way, cust X pipe, Dynomax Bullets and dumped.

DirtyBird222

iTrader: (7)

there is a place in sebring that is going to do mine. my dad is great friends with the guy so it might be an exception but I can always call up there and find out if he'll do it for anyone else.

jeff5076

thanks for all the help and tips guy

so everyone thinks true duals is the way to go? i want to get some headers to, what brand will go best with the TSP true duals? and what else would i need ? let me know...thanks.

Art Vandaley

iTrader: (33)

sounds great mike!

QuickdomesticRacer

iTrader: (4)

camar0corey

iTrader: (22)

Ohhhhh...... What setup is that? Pipe diameter? Those bullets, or hush powers, or something else? Details Details! That almost looks like I could run that on my car.