Forced Induction Superchargers | Turbochargers | Intercoolers

Stock Bottom & Boost - Reliability List

Thread Tools
 
Search this Thread
 
Old 01-28-2009, 09:22 PM
  #1  
Customizing Director
Thread Starter
iTrader: (12)
 
MadIceV8's Avatar
 
Join Date: Mar 2002
Location: SW Chicago, IL
Posts: 5,778
Likes: 0
Received 4 Likes on 2 Posts

Post Stock Bottom & Boost - Reliability List

I am wanting to make a comparative list of how long the LS1 stock bottom end has lasted under boost and eventually make it a sticky. Generally I see everyone say 550rwhp, I just want to see how valid this statement roughly is.

So the people I want to reply in the thread are ones who have ran boost on a stock bottom end (pistons, rings, rods). Even if you broke something in the motor, still post up. Post only cars you own(ed).

Here is the format I'd like to see it in:
- Type of Forced Induction (Turbo/Supercharger)
- Boost Amount / RWHP
- Miles on the car when FI installed
- Miles ran since FI has been on the car (ie: current mileage)
- IF you broke the motor, list what was broken.


__________________________________________________ ________________

TYPE ----- BOOST -- RWHP -- INSTALL -- SINCE -- BROKE?
T70 --------- 8 --------- xxx ----- 82k ------ 85k ------ N
STS --------- 5 --------- 453 ----- 18k ------ 37k ----- N
TC-76 ------- 9-10 ----- xxx ------ 26k ------ 32k ----- N
76gts ------- 12 -------- xxx ------ 55k ----- 63k ------ N
D1SC ------- 11 -------- xxx ------ 65k ----- 66k ------ Y
P1SC ------- 10 -------- xxx ----- ~80k ---- 120k ----- N
STS 76mm -- 5-15 ------ xxx ------ 109k --- 113k ----- N
P1SC ------- 7 --------- 489 ------ 28k ----- 50k ------ Y
T70 -------- 10 -------- xxx ------ 140k ---- 143k ----- N
APS Twin --- 7 --------- 508 ------ 89k ----- 105k ---- N
APS Twin --- 8 --------- xxx ------- 21k ----- 35k ----- N
D1SC ------- ? --------- 560 ------ 60k ----- 70k ----- N
P1SC ------- 8 --------- xxx ------- 79k ---- 81k ----- N
APS Twin --- 10 -------- 585 ------ 61k ----- 65k ----- N
D1SC ------- 8 --------- 475 ------ 48k ----- 54k ----- N
F1A --------- 6 -------- 540 ------ xxx ------ xxx ----- N
STS -------- 5-8 ------- 460 ------ 61k ----- 75k ----- N
D1SC ------- 10 -------- 612 ------ 0k ------ 11k ----- N
PTS 67mm --- 7 -------- 507 ------ 35k ----- 50k ----- N
D1SC -------- 7 -------- 500 ------ 29k ----- 39k ----- N
STS --------- 7 -------- xxx ------- 80k ----- 5k ------ Y
Vortech T ----10 ------- 640 ------ 58k ----- 67k ----- N
76GTS STS --- x ------- 626 ------ 43k ----- 43k ----- Y
STS 67mm --- 10 ------ 550 ------ 60k ------ 80k ----- N
D1SC --------- 7 ------ 523 ------ 34k ------ 38k ----- N
T76 ---------- 16 ----- 580 ------ ??? ------- 8kms --- N
D1SC -------- 10 ------ 540 ------ 30k ------ 34k ----- Y
T76 ---------- 17 ----- 580 ------ ??? ------- 10k ----- Y
P1SC -------- 13 ------ 588 ----- 36k ------- 50k ----- N
Kenne Bell ---- 8 ------ 560 ------ 10k ------- 24k ---- N
Incon TT ----- 8 ------ 525 ------ 25k ------- 85k ---- N
P1SC -------- 7.5 ----- 450 ------ 52k ------- 107k --- N
APS Twin ---- 10 ------ 625 ------ 101k ----- 111k --- N
MP112 ------- 7.5 ----- 495 ------ 79k ------- 81k ---- Y
MP112 ------- 6.5 ----- 518 ------ 65k -------- 66k --- N
D1SC -------- 8 ------- 590 ------ 39k -------- 50k --- N
D1SC -------- 7 ------- 520 ------ 98k ------- 135k --- N
D1SC -------- 9 ------- 580 ------ 65k -------- 88k --- N

Updated to post #100

Last edited by MadIceV8; 09-18-2009 at 03:06 PM. Reason: Updated
Old 01-28-2009, 10:36 PM
  #2  
9 Second Club
iTrader: (10)
 
396375's Avatar
 
Join Date: Mar 2008
Location: Niagara Falls NY
Posts: 256
Likes: 0
Received 1 Like on 1 Post

Default

Here's a start on what usually breaks.
http://forums.corvetteforum.com/c5-f...ottom-end.html

I run 8#s on a stock LS1 with 85,000 miles.Car goes 127 in the 1/4 so not making big power.Single T70 turbo.Maybe 3000 miles boosted.
The following users liked this post:
tdmaker (03-24-2022)
Old 01-28-2009, 11:05 PM
  #3  
12 Second Club
iTrader: (6)
 
Schantin's Avatar
 
Join Date: Jun 2004
Location: Ft. Irwin, California (But Virginia is home)
Posts: 1,501
Likes: 0
Received 7 Likes on 1 Post

Default

Originally Posted by MadIceV8
I am wanting to make a comparative list of how long the LS1 stock bottom end has lasted under boost and eventually make it a sticky. Generally I see everyone say 550rwhp, I just want to see how valid this statement roughly is.

So the people I want to reply in the thread are ones who have ran boost on a stock bottom end (pistons, rings, rods). Even if you broke something in the motor, still post up. Post only cars you own(ed).

Here is the format I'd like to see it in:
- Type of Forced Induction (Turbo/Supercharger)
- Boost Amount
- Miles on the car when FI installed
- Miles ran since FI has been on the car
- IF you broke the motor, list what was broken.


I will create a list once I get a decent amount of entries. Thanks .
- STS Rear-mount Turbo with FMIC, CC228 cam on a 116LSA, and 317 heads.
- 5PSI
- 18K miles when installed
- 37K miles when removed.

Never broke anything in motor. Only wear noted on engine H/C swap afterwards was excessive wear on forward-most cam bearing. Cylinders, pistons etc had some carbon buildup, but were otherwise in excellent shape.

Car dynoed 453RWHP/ 432RWTQ with a 11.1 to 1 AFR on a 2-bar SD tune.
Old 01-28-2009, 11:31 PM
  #4  
TECH Fanatic
iTrader: (3)
 
2002/Black/SS's Avatar
 
Join Date: Jan 2006
Location: boca Raton, Florida
Posts: 1,150
Likes: 0
Received 1 Like on 1 Post

Default

-Front mount TC-76 turbocharger
-9-10psi
-installed at 26k miles
-still going strong at 32K miles

car runs 3650LBS and traps 128 so its a good amount of power through a stock bottom end
Old 01-28-2009, 11:57 PM
  #5  
Launching!
iTrader: (63)
 
Subliminal Hit's Avatar
 
Join Date: Apr 2006
Posts: 200
Likes: 0
Received 0 Likes on 0 Posts

Default

76gts
~12 psi (added 317's)
55,000
at 60,000 now
still running fine, plan on pulling it out that way this spring for a forged bottom end

the motor held up to a good amount of high IAT's and knock because my IC was past its capabilities this year and I just kept pushing it but it held up...guess I was just lucky.
Old 01-29-2009, 02:18 AM
  #6  
TECH Senior Member
iTrader: (39)
 
LilJayV10's Avatar
 
Join Date: Apr 2007
Location: Evansville,IN
Posts: 9,309
Received 857 Likes on 610 Posts

Default

Good thread.
Old 01-29-2009, 02:56 AM
  #7  
TECH Enthusiast
iTrader: (3)
 
Black01M6SS's Avatar
 
Join Date: Nov 2002
Location: Louisiana
Posts: 546
Likes: 0
Received 0 Likes on 0 Posts

Default

D1SC with FMIC, 224/227 .560/.560 114lsa cam, full exhaust
11psi
65,000
65,750
Broken ring lands on #7


Never had it on the dyno. I tried to tune it myself on the street with EFI Live and it ran hard while it lasted which wasn't long. First sign of trouble was when it started blowing the dipstick up under boost.
Old 01-29-2009, 04:43 AM
  #8  
TECH Cry Baby BOSS APPROVED!
iTrader: (5)
 
Urban Legend's Avatar
 
Join Date: Jul 2005
Posts: 5,799
Likes: 0
Received 2 Likes on 2 Posts
Default

P1SC with a FMIC with 10 pounds of boost for over 3 years (525 rwhp)
Had over 80,000 miles when I went Procharger
Built a forged engine when the stock engine had about 120,000 miles. Never had an issue with the engine and boost


Daily driver with no 1/4 time.
Now the tranny...

Last edited by Urban Legend; 01-30-2009 at 03:55 AM.
Old 01-29-2009, 07:07 AM
  #9  
TECH Addict
iTrader: (8)
 
pwrtrip75's Avatar
 
Join Date: Jan 2004
Location: Janesville, WI
Posts: 2,383
Likes: 0
Received 9 Likes on 7 Posts

Default

my 5.3L calculated with my ET/mph to 640HP car weighs 3660 w/ me in it, and 10.30 @ 131mph, I cant build a lot of boost off the line and it dont hit full boost till after the 60ft, im also blowing through my converter higher RPMs than I should going through the traps at 7500.. 3.50 gears w/ 29.5" tall tires. So im sure it makes more HP than it calculates out to.

Stock 5.3L shortblock (junkyard.. mileage unknown)
15psi boost
50hp shot of nitrous.
Living strong going on 3 years.
Old 01-29-2009, 07:11 AM
  #10  
On The Tree
 
bravoboost's Avatar
 
Join Date: Oct 2007
Location: DA SUCK,
Posts: 198
Likes: 0
Received 0 Likes on 0 Posts
Default

pushed my LS2 to 650whp w/ meth and it broke lol forged motor now
Old 01-29-2009, 07:11 AM
  #11  
11 Second Club
iTrader: (2)
 
Silver_TransAm's Avatar
 
Join Date: Mar 2007
Location: San Antonio, Tx
Posts: 608
Likes: 0
Received 1 Like on 1 Post
Default

Sts intercooled 76mm turbo and 317's
5-15lbs
109k when kit was installed
113k as of now
Nothing wrong with motor just keep breaking trannies
Old 01-29-2009, 07:24 AM
  #12  
8 sec potential, 12 sec slip
iTrader: (50)
 
ChevyChad's Avatar
 
Join Date: Apr 2002
Location: Savannah, GA
Posts: 4,093
Likes: 0
Received 2 Likes on 2 Posts

Default

P-1SC procharger with midlength headers & borla catback (entire engine 100% bone stock)

7psi (3.5" dual intercoolers)

installed at around 28k miles

broke driveshaft & rear end at about 35k miles (1st track attempt)

broke #5 ringland at 50k miles

made 489rwhp at the time


Last edited by ChevyChad; 01-29-2009 at 07:34 AM.
Old 01-29-2009, 08:32 AM
  #13  
9 Second Club
iTrader: (10)
 
396375's Avatar
 
Join Date: Mar 2008
Location: Niagara Falls NY
Posts: 256
Likes: 0
Received 1 Like on 1 Post

Default

I guess it would be silly but I would like to see someone go for just forged pistons and see how much power they could make.I'm still surprized you don't hear on any broken stock rod bolts and yet a lot of people think it's critical to replace them.I think the tune is the most critical part in keeping a stocker alive.
Old 01-29-2009, 08:52 AM
  #14  
LS1Tech Sponsor
iTrader: (10)
 
hellbents10's Avatar
 
Join Date: Mar 2004
Location: Spring Lake, MI
Posts: 4,439
Likes: 0
Received 3 Likes on 3 Posts

Default

Good tune and fuel and the rods will go first. Dave has been at 825whp with his Lq9 for 3k mi or so (one season, w/ a couple of dry street winter rides already lol).
Old 01-29-2009, 09:38 AM
  #15  
10 Second Club
iTrader: (2)
 
ForcedInduction's Avatar
 
Join Date: Jun 2007
Location: Manchester, NH
Posts: 202
Likes: 0
Received 1 Like on 1 Post

Default

- MasterPower T70 Turbo on 2000 Bone Stock 5.3 with 140k miles
- 10 psi last season/499 rwhp
- 108,xxx on truck 140,xxx on engine
- 3k miles on Turbo setup
- Have'nt broke any engine parts yet, but blew two TH400 cases. (That was my fault tho)

Last edited by ForcedInduction; 01-31-2009 at 08:13 PM.
Old 01-29-2009, 09:56 AM
  #16  
12 Second Club
iTrader: (4)
 
Hugger Z's Avatar
 
Join Date: Oct 2004
Location: Holly, MI
Posts: 1,363
Likes: 0
Received 1 Like on 1 Post

Default

- Type of Forced Induction - APS Twin Turbo
- Boost Amount - 7psi (made 508rwhp/513rwtq)
- Miles on the car when FI installed - 89k
- Miles ran since FI has been on the car - Put it in storage with 105k on it. I DD the heck out of the thing in the warmer months.

The car traps 126 in the 1/4. I ONLY run street tires at the moment because of the 10bolt so can't launch too hard. The tires are my fuse. And this is also my DD so I am very happy with it. It runs whatever it runs at the track.
Old 01-29-2009, 12:14 PM
  #17  
Customizing Director
Thread Starter
iTrader: (12)
 
MadIceV8's Avatar
 
Join Date: Mar 2002
Location: SW Chicago, IL
Posts: 5,778
Likes: 0
Received 4 Likes on 2 Posts

Default

Thanks for the input guys. Keep em coming, I'll start to build the list soon.
Old 01-29-2009, 12:46 PM
  #18  
TECH Apprentice
 
Mr.Big's Avatar
 
Join Date: Aug 2006
Posts: 366
Likes: 0
Received 0 Likes on 0 Posts
Default

mods in sig...
Stock LS2 short block has never been out of the car... now 761rwhp 645rwtq on boost only (no N2O) 31,000+ miles.
the car was S/C'd right after I bought it new back in '05, I only put 2000 miles on it waiting for the S/C kit to come in... the very first setup netted 620rwhp 518rwtq back then... It's ALL about the tune...
P.S. this car is set up for standing mile, it gets raced every chance I get...
Old 01-29-2009, 01:43 PM
  #19  
On The Tree
iTrader: (7)
 
GNXClone's Avatar
 
Join Date: Sep 2007
Posts: 122
Likes: 0
Received 1 Like on 1 Post

Default

APS Twin Turbo
8 PSI
Installed at approx 21,000
Car is now at approx 35,000

All stock long block. I run 15 degrees of timing at peak tq, with meth.
Old 01-29-2009, 07:27 PM
  #20  
TECH Apprentice
iTrader: (32)
 
Floader's Avatar
 
Join Date: May 2004
Location: Vermont
Posts: 338
Likes: 0
Received 0 Likes on 0 Posts

Default

D1SC at 8psi
installed at 60k now at 70K
30+ track runs
makes 560rwhp on stock 98 long block, 224-228 114 cam
never had a head off and hope it holds together one more season... but if not


Quick Reply: Stock Bottom & Boost - Reliability List



All times are GMT -5. The time now is 01:49 PM.