I'm Electronically Dense - Harlan's 2-Step Question
 

I'm about to hook up my 2-step. I don't plan on using the yellow wire for nitrous deactivation ( or anything else ) so what do I do with it?

Also, I just plan on using a master switch, no connection to clutch. The directions say to wire the grey and white together, into a switch to ground. I'm thinking pushbutton switch, but what kind? Or does it matter? I mean, would a freakin' doorbell work??

- Dug

Re: I'm Electronically Dense - Harlan's 2-Step Question
 

Don't do anything with the yellow wire then. Just leave it. It only goes to ground, so even if the bare wire was exposed nothing would happen unless it came across an open 12v wire somewhere.

Yes, a doorbell would work. Any normally open momentary push button that you can get from Radio Shack would work fine.

Re: I'm Electronically Dense - Harlan's 2-Step Question
 

Thanks Derty!! Just the answer I was looking for . . .

- Dug

Re: I'm Electronically Dense - Harlan's 2-Step Question
 

If someone rings it, DONT let them in, prob a sales men!!

Re: I'm Electronically Dense - Harlan's 2-Step Question
 

Ha ha! I'll make sure I'm the only one ringing it! ;)

- Dug