devil's own Meth kit nozzle selection help
 

Ok I don't want this to turn into an argument about whether or not I should run Meth. I AM GOING TO. I trust my tuner and trust my equipment so please let's stay on topic.

I do not know a lot about Meth or nozzle selection so I need a little help my build is a 347 t76 on 16-18psi

I think I read sumwhere one nozzle is good to 500hp so I figure ill need a dual nozzle setup so what sizes do I need?

Thanks for the help guys!

bump anyone?

Well I talked to the lady at devils own and she was pretty confident that I wouldn't need more than a size 7 single nozzle which makes me pretty happy because now I don't have to buy the dual nozzle up grade!!

What yall think? Can some one verify this?

meth
 

if you are looking to hit that kind of power you should definitely go with a dual set up...#7 on one side #10 on the other total 17...devilsown has a calculator on there webside to figure it out..i am running the setup above 100% meth.. 402...D1 supercharger 14 pounds of boost making over 760 RWHP

Aite man thanks do you have a link to this calculator? I'm at work on my blackberry and can't find it web pages don't show up quite the same.

Thanks man!

two #7's or a #7 and a #10 with that much boost!

Personally I love the stuff :)

Aite guy thanks for the help I'm exited to get this thing done!! Ima pick up both 2 #7s and a #10 and see what works the best!


Thanks guys much appreciated!

meth
 

go to devilsown ijection click on the forum page you will see nozzle calculator click on that and the rest is easy if no luck
talk to Chance at devilsown #1-405-470-4356

thanks for bringing them up, i was about to build my own kit for 325, i'll just buy it there and save the leg work!

do they have them in GPH for the size?

metn
 

that is how the nozzles are reated

so a 7 is 7gph? if thats the case i run one 12.2gph nozzle on my car right now and with a 1.5gal tank it does not last long

then its working good:D

Yeah I actually got my kit off of ebay lol I got it from a ebay store for 325 plus 10 bucks for shipping altogether it cost me 335 bucks. They have 2 different options one comes with a 2 bar map sensor for like 395 the other comes with out it for 325 I went without it since I have a 3 bar map.

The people at devils own are really awesome! The kit comes with a 2 bar map controller and since its new they told me to send it to them and they'd swap it out with a 3 bar controller for free! Great people!

02anti_vnm depending on your mods you will need more meth. List out your mods and i will give you my recommendations. 500hp its usually time for 2 nozzles. But not always, depends on intake air temp, size of motor and what type of force induction there is.

Zane, have you see the new TBSS sitting out front of devilsown.. Its pretty sweet.