KILLER-LS1

iTrader: (18)

hey guys, i would like to be able to start up my car and check for leaks and everything before i tow it to a tuner, but can i at least start it on the stock tune with the stock injectors & walbro pump? im just going to let it idle. once i get to the shop, ill put in the 60# injectors..

also does anyone recommend a FI tuner in southern california??

stevied916

iTrader: (30)

well at idle no load it will be 0 psi but you should be ok with it just idling. I wouldnt try to drive it though

KILLER-LS1

iTrader: (18)

no i wont, at the most, it would be driving it up the car ramp, if even that...

ninetres

iTrader: (35)

You should be okay. Just dial the FP regulator to get the A/F close if you have heads/cam. If not, you should be fine if you stay out of boost driving up the trailer lol.

LQ9CHEVELLE

iTrader: (2)

Talk to Charlie @ RPM in Valencia, CA. He's mainly a corvette guy, but tunes everything GM. Has done lots of turbo @ supercharged tunes, and he stands behind his work. Nice guy also! PM me and ill send you his ###

1320

iTrader: (6)

Youll be fine moving the car around. For tuning you can try andy....(corvettes)

I was just down in the oc last week too. I could have gotten you atleast rolling.

Time to get a scan gauge.....tuner program, and a wide band maybe though...

IT_SS

iTrader: (5)

pm sent

lt170chevelle

iTrader: (2)

Yeah +2 on being fine as long as you arent giving too much gas and spooling up you will be fine.

MadIceV8

iTrader: (12)

Why not just run the car without the belt installed?

jrcc2002

iTrader: (3)

Maybe the turbo doesn't use a belt.

98Camarod

iTrader: (43)

lol

As long as you didn't put a 2 bar map and not change the operating software you should be fine.

JonCR96Z

iTrader: (33)

There's a local guy that has a D1SC on his T/A and it has stock tune. The fuel trims are maxed out everywhere and he says it runs out of fuel at about 4500. Supposedly does about 8spi. He's been driving it like that for a year.

KILLER-LS1

iTrader: (18)

well looks like i need to run a 2 bar w/ speed density. so ill be trailering it haha

MadIceV8

iTrader: (12)

LMAO... my dumb comment of the year

KILLER-LS1

iTrader: (18)

haha its okay, i guess i didnt really say it was a turbo lol

jrcc2002

iTrader: (3)

It took me a while to figure it out too. The only way I knew it was because you said there was a turbo in the works in your sig.

EPP

iTrader: (22)

If you leave the stock injectors in it for now, you'll be just fine at part throttle driving. Bob