My Build Thread: PT88, Iron 346, 6spd, Pics/ Vids
#1
Banned
Thread Starter
iTrader: (4)
Join Date: Jul 2010
Location: Texas
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
My Build Thread: PT88, Iron 346, 6spd, Pics/ Vids
UPDATE VIDEO PAGE 3, update 3/20 now going th400 swap
Yes Another Turbo Build I figured id share with you guys some pics and what not. Please feel free to chime in with comments or questions. Id like to thank Trev ss for helping with the build as well as all my friends that helped out, Trm8tr for the turbo kit, mity mouse for the fuel, Ray @ fortress performance for custom cross over pipe and fab work, Jason @ TDP for the built trans and clutch. Havent decided who is tuning the car yet. Will be running 16-17psi for now but i have boost controller that is setup to run around 22psi for future.
I went from:
Built LS6
Stock 241 heads
Trex Cam
N20
4.10s
Built t56
Car has been down for almost 2 months while I did this
Iron 346 Fully forged, JE pistons, Callie Rods
Stock 317 heads
Pat G custom Cam
PT88 .75 AR Front Mount Turbo. .96 exhaust. Keeps Stock Kmember, A/c, and power steering, and doesnt require you move the alternator. ( TRMN8R's Old kit)
Dual Walbro 255s
-8 feed, Stock feed for return
Speed Inc High Flow Rails
80# injectors
31x12x4 Intercooler
3.42s
Built t56
old setup
turbo kit
Yes Another Turbo Build I figured id share with you guys some pics and what not. Please feel free to chime in with comments or questions. Id like to thank Trev ss for helping with the build as well as all my friends that helped out, Trm8tr for the turbo kit, mity mouse for the fuel, Ray @ fortress performance for custom cross over pipe and fab work, Jason @ TDP for the built trans and clutch. Havent decided who is tuning the car yet. Will be running 16-17psi for now but i have boost controller that is setup to run around 22psi for future.
I went from:
Built LS6
Stock 241 heads
Trex Cam
N20
4.10s
Built t56
Car has been down for almost 2 months while I did this
Iron 346 Fully forged, JE pistons, Callie Rods
Stock 317 heads
Pat G custom Cam
PT88 .75 AR Front Mount Turbo. .96 exhaust. Keeps Stock Kmember, A/c, and power steering, and doesnt require you move the alternator. ( TRMN8R's Old kit)
Dual Walbro 255s
-8 feed, Stock feed for return
Speed Inc High Flow Rails
80# injectors
31x12x4 Intercooler
3.42s
Built t56
old setup
turbo kit
Last edited by Busy Mopper; 03-28-2011 at 11:51 PM.