Rocker arm question Ok I have a ls9 cam and it has about 560 lift. Would it be worth while to get 1.8 rockers to take my lift to round .600 ? Iron block ls1 Diamond flattops Compstar rods Stock crank 317 heads Comp ratio around 9.5 to 1 Prolly run a t76 master power or t70 open to opinions |
Anyone |
As long as there's not a clearance problem and the valve springs don't bottom out you will gain more power. |
Different ratio rocker arms can add power, but consider the cost. A half pound more boost will make more power. |
well theres a set on here right now for a little over 300 so thats my question i guess would it be better to get them and if i did what kind of hp difference would it make. if i can go a half pound more boost and get more power its not worth it for me |
All times are GMT -5. The time now is 10:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands