twin MP 70's with .96ar's??
 

Would the .96 ar work OK as a twin setup. I know a little smaller would be better but I already have one of them. It would be going on a low boost 5.3 and then a forged 6.0.

This is in a 88 Camaro looking for tens with the 5.3 combo and eventually 8's with the 6.0 combo.

i would suggest .68 AR housings. i used the .96s and i was having a VERY tough time below 4k rpm. LAGGY and that was on a 370.

I have twins with .68 housings on a 370 and it spools DAMN good and has been 8.62@159

Sorry to hijack thread, BUT....... how you guys think twin mp70 w/96's would do on a healthy 408? (spool wise)

not sure. but if it's well thought out then you'll be just fine. talk to the experts.

I think it would be good on a 408. On a 5.3 on the other hand, Im thinking it would spool SLOW. Anyone know first hand how the spool would be on a 5.3 if I changed to .68's