intercooler inlet/outlet
03-30-2014, 01:16 AM
#1
Teching In
Thread Starter
Join Date: Apr 2012
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
intercooler inlet/outlet thinking bout building a turbo kit for a ls2, im running a 102mm tb so im wondering basically is whats the biggest inlet/out on the intercooler to run an how to set it up? does the motor get choked up by stepping down like that?
03-30-2014, 05:01 AM
#2
9 Second Club
How much power you expecting to make ?
That 102mm would probably support 2000hp with ease.
Even the stock 75mm TB can easily handle 1000hp
So what exactly are you proposing ?
03-31-2014, 05:15 AM
#3
Teching In
Thread Starter
Join Date: Apr 2012
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
03-31-2014, 05:32 AM
#4
9 Second Club
03-31-2014, 07:14 AM
#5
I'm in the same boat. I have a 102mm tb and I have a Treadstone TRST9 fmic. The intercooler has 3" inlet/outlet. Should I go 3" piping or 4" and neck down at the intercooler? Or a 4"to 3" bellow at the tb? I'm wanting to push my setup to over 1,000rwhp+.
04-02-2014, 12:39 AM
#7
Teching In
Thread Starter
Join Date: Apr 2012
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
ugh bottle necking looks so gay, an already have the 102