RMCR High Mount YSI Set Up
#62
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mike with 80T crank pulley and 28T blower pulley i will be getting max boost what size of a injector you guy's run with this set up ?
If I order 30T and 32T just to have option to change my boost level do I need to order belts or 28T belt will work with your YSI set up ?
What kind of boost should I have with 28T
Thanks
If I order 30T and 32T just to have option to change my boost level do I need to order belts or 28T belt will work with your YSI set up ?
What kind of boost should I have with 28T
Thanks
The belt will work on any of the pulley sizes.
We have seen 17 to 22 lbs of boost depending on the engine combo.
#63
LS1Tech Co-Founder
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had TH400, went 1.35 on 28's, 3500 raceweight, and was running 83 lb low impedance injectors, and I was 8 rib. Without belt slippage 8's shouldn't be a problem for you guys if you go for it.
#64
TECH Apprentice
iTrader: (10)
Join Date: Apr 2011
Location: So Cal
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I made 754rwhp with my old custom YSi kit, I forget if that was with a 2.90 or 3.12 blower pulley. I was running a little 8:1 348 so that was at 21 psi. I went 9.4@143 @ 680wrhp and 18 psi. Loved how that combo came off the 'brake. I think for next year I have decide whether the next project is all motor or FI.
#66
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Would I be ok with 83lb high impedance injectors 8:5:1 cr LQ9 421CI with YSI set up ? I think i should order some bigger injectors that Mike is using as well
Last edited by ivan c; 11-12-2011 at 10:37 PM.
#68
On The Tree
iTrader: (24)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ivan you will need bigger ones...Mine is at 84% with 107# injectors.
For everyone that asked about the result, with the 8 rib slipping on 18.5# of boost the car made 856. With the cog and 22# of boost the car made 868 so I think my heads are maxed out around 19#'s. But I have 868hp @ 84% DC, on 100LL avgas at 21* timing. For you guys with a v9-gtrim dont upgrade to a v1 just skip to a ysi and pulley it down if your block is about to blow up. The price difference is only a couple hundred bucks and makes you have room to grow. pm me with any questions thanks.
For everyone that asked about the result, with the 8 rib slipping on 18.5# of boost the car made 856. With the cog and 22# of boost the car made 868 so I think my heads are maxed out around 19#'s. But I have 868hp @ 84% DC, on 100LL avgas at 21* timing. For you guys with a v9-gtrim dont upgrade to a v1 just skip to a ysi and pulley it down if your block is about to blow up. The price difference is only a couple hundred bucks and makes you have room to grow. pm me with any questions thanks.
#70
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ivan you will need bigger ones...Mine is at 84% with 107# injectors.
For everyone that asked about the result, with the 8 rib slipping on 18.5# of boost the car made 856. With the cog and 22# of boost the car made 868 so I think my heads are maxed out around 19#'s. But I have 868hp @ 84% DC, on 100LL avgas at 21* timing. For you guys with a v9-gtrim dont upgrade to a v1 just skip to a ysi and pulley it down if your block is about to blow up. The price difference is only a couple hundred bucks and makes you have room to grow. pm me with any questions thanks.
For everyone that asked about the result, with the 8 rib slipping on 18.5# of boost the car made 856. With the cog and 22# of boost the car made 868 so I think my heads are maxed out around 19#'s. But I have 868hp @ 84% DC, on 100LL avgas at 21* timing. For you guys with a v9-gtrim dont upgrade to a v1 just skip to a ysi and pulley it down if your block is about to blow up. The price difference is only a couple hundred bucks and makes you have room to grow. pm me with any questions thanks.
I also got him to send me a 30 tooth and 32 tooth cog,I think i will start with 32 tooth to see where it gets me then i will order bigger injector.
#71
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mike (YSI-LT1) RMCR,
Nice job on stepping up the game for vortech blowers on an F-body. Do you have any specific kits for the LT1 cars that have the level of development like I'm seeing in your other kits (LS1)?
Nice job. There are some beautiful YSi pics in this thread.
Nice job on stepping up the game for vortech blowers on an F-body. Do you have any specific kits for the LT1 cars that have the level of development like I'm seeing in your other kits (LS1)?
Nice job. There are some beautiful YSi pics in this thread.
#73
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mike (YSI-LT1) RMCR,
Nice job on stepping up the game for vortech blowers on an F-body. Do you have any specific kits for the LT1 cars that have the level of development like I'm seeing in your other kits (LS1)?
Nice job. There are some beautiful YSi pics in this thread.
Nice job on stepping up the game for vortech blowers on an F-body. Do you have any specific kits for the LT1 cars that have the level of development like I'm seeing in your other kits (LS1)?
Nice job. There are some beautiful YSi pics in this thread.
As of right now we are only modifying old Vortech LT1 kits or I have a bracket set up that mounts it high on the driver side with a CCW blower for the 94-96 Impala SS
We also have a new kit that mounts the supercharger low on the driver side for the LS. It will support up to a Novi 2200SL right now.
Thanks.
#75
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ivan you will need bigger ones...Mine is at 84% with 107# injectors.
For everyone that asked about the result, with the 8 rib slipping on 18.5# of boost the car made 856. With the cog and 22# of boost the car made 868 so I think my heads are maxed out around 19#'s. But I have 868hp @ 84% DC, on 100LL avgas at 21* timing. For you guys with a v9-gtrim dont upgrade to a v1 just skip to a ysi and pulley it down if your block is about to blow up. The price difference is only a couple hundred bucks and makes you have room to grow. pm me with any questions thanks.
For everyone that asked about the result, with the 8 rib slipping on 18.5# of boost the car made 856. With the cog and 22# of boost the car made 868 so I think my heads are maxed out around 19#'s. But I have 868hp @ 84% DC, on 100LL avgas at 21* timing. For you guys with a v9-gtrim dont upgrade to a v1 just skip to a ysi and pulley it down if your block is about to blow up. The price difference is only a couple hundred bucks and makes you have room to grow. pm me with any questions thanks.
I can't see the Patriot Stage 3 heads holding you back.
#77
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I was at straightline there was a ws6 there running a ysi and he had his hood cut like this
Looked really clean , but either way would look good. get a sound clip on here, I,m sure there,s more than just me that wants to hear that bad boy
![](http://i849.photobucket.com/albums/ab57/1phatasp/295s/dynotuneday048.jpg)
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#78
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I will put video of the car soon
#79
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Last edited by ivan c; 03-04-2012 at 07:33 PM.