BruteSpeed / EPP blower cam - users!
 

Heard lots about this cam! From both N/A setups and FI centrifugal setups.

Was planning on throwing this in a 347 LS6. Is this too much for street drivability? People with 390ci seem to use the same cam (which would be tame vs being used in a 347)

So what displacement do you guys typically run with this cam?

Do a search. A lot of people use this cam. Myself included. Been in my 347 for 3 years now. My car has been NA and FI with this cam. I have had bigger cams NA also. This one drives fine.

346 with this cam and no problems.

347 with d1sc no issues. Sounds and runs great

had it on my old 346 and s480 turbo and sounded great
http://i1196.photobucket.com/albums/...x54/th_206.jpg

Got one in my 410 ci LSX motor and it sounds great hope to have dyno and track numbers soon!

Anyone have video or sound clips of how it sounds? I have this cam also but have not fired my block up yet, I would like to hear it..

Have one in an 06" GTO. Cam only with long tubes and a FAST 102 it made 438rwhp and drives great.

Google it there are several videos out there. :eyes:

Click the pic!!!! ^^^^^This is a video!!!^^^^^^^^

I hear ya tirefire. it will sound good. you can youtube epp blower cam. it comes up several times in several setups.

Awesome cam, awesome drivability if the right guy tunes it....and you cannot go wrong with Bob at Brute Speed.

http://i993.photobucket.com/albums/a...h_100_2209.jpg

Click on picture to watch video.

Ran 9.88 @134 with a 131. 60 ft.
347 Epp/Brutespeed cam blowing through the converter. This cam will work fine for you. I drive my car over an hour to the track on the highway, very streetable.

I have the cam on my 347ci Turbo ZO6 The drivability is awesome, sounds great and pulls hard even when the car was N/A
I'd use it in 346-400ci :nod:

And of course Bob is da man :D

I agree with Venom. Cam sounds great, works in a lot of different combos and seems to be pretty good up to and into the lower 400ci range. Run the cam, you'll love it and it will perform well. Its also not a hard cam for tuners to dial in....

Thanks, I appreciate it! Bob

Got one to go on my iron 347. I can't wait to get that motor finished up and installed!