turbotuner20v

Need something in the next 2-3 weeks max.

Ordered mine on 5/22, but Callies totally f'd up my order and now I'm dropped into the next batch that's 9-10 weeks out.

Needs to be a 3.625" 2.1" journal, dragon slayer or magnum is fine.


If there's another option out there besides Callies that can meet my time requirement and handle the same power, I'm open to that too.

cmac06

iTrader: (16)

I had the same problem last year. CBM had them in, but you're going to pay.

turbotuner20v

What's Cmb?

Danny

iTrader: (16)

I'm not sure if a used one is a option for you. If so you might wanna post in all LS type forums. Just a thought.

4DRUSH

iTrader: (2)

Try Scoggin Dickey

https://sdparts.com/category/engine-...ts/crankshafts

cmac06

iTrader: (16)

CBM Motorsports in California.

RonA

iTrader: (1)

I was in the same boat so I ended up buying a 3.75" stroke magnum.

turbotuner20v

Thanks guys, I'll call around Monday.

Used is definitely an option.

I want to reuse my pistons, so I don't think 3.75 will work

RonA

iTrader: (1)

Lunati makes a 3.625" crank that's a bit more expensive than the Callies Dragonslayer, but they are equally hard to find in stock.

turbotuner20v

Is it comparable in strength/finishing to the dragonslayer or magnum?

CBM Motorsports

iTrader: (2)

Unfortunately we don't have any of those in stock right now. They are about 2 weeks out if ordered today. We can also get The Lunati but they are also about 2 weeks out.

turbotuner20v

I actually gave you guys a ring today, but wasn't able to reach Brent.

2 weeks for a Dragon Slayer/Magnum wouldn't be bad at all.

I actually did manage to find a Lunati Signature Series that could be delivered to me by the end of the week though.

~$400 price difference aside, how comparable are the Callies Magnum and Lunati Signature?

CBM Motorsports

iTrader: (2)

Well there is your problem, you asked for Brent! Should have asked for Sean

We normally use Callies but when we get in a pinch we use the Lunatis. They do make a nice product and we haven't had any problems with them. The only bad thing I can think of is the price... I would put both cranks in the same quality category.