denmah

iTrader: (2)

this is my girlfriends 91 i believe 240sx
going to put my 4.8/ls1cam/60e/on3 76mm setup in this car from the black fairmont that easily made 400whp on pumpgas 11psi, should be a rocket ship when we turn it up.









first video

second video

F110Mech

iTrader: (2)

sounds like it's going to be a good time

2muchboostNY

iTrader: (8)

Yes Denmah! Just added a twinkle in our 240-LS swap guys eyes. What mount kit did you go with or did you fab yoursel? How did you set up the fuel system....I see some rails.

Blackpanther99

iTrader: (8)

Def gonna haul ***.

7GRANDGERNADE

Gonna keep my eye on this build !

allmotordustin

iTrader: (1)

I enjoy all his builds! is this the impact motor? cant wait to see all the nay-sayers chime in..

Forcefed86

iTrader: (4)

denmah

iTrader: (2)

going to use stock feed and return lines and a regulator on these ebay rails since the intake is bare, and nearly 99% of them are returnless, the rails and regulator and fittings are going to be the same as if i bought the stock rail sadly lol

i am making my own mounts, the mounting kits are INSANELY priced, and as far as i know they only are for t56

we tore this motor down and i showed my girlfriend how they go together and we did build it with impact guns together haha

2muchboostNY

iTrader: (8)

^thanks for the input. I just saw the video which wouldnt upload at work. I agree about the mounts and pricing.

Any chance you could share the info for the fuel fittings? I am buying the parts for my fuel setup soon and I want to be sure I get the right stuff....would hate to light my car on fire lol.

denmah

iTrader: (2)

yeah i am not totally done on it yet but they were ebay rails with -6 fittings and more included also with like 6ft of stainless line.

i wanna see if i can get a barb that goes from this 5/16th stock to the3/8ths size i need for the -6 reg and rails fittings so i can just connect to the stock engine bay stuff

CameronVic

iTrader: (5)

Awwwwwwww yussssssss!!!

hokeplaya05

iTrader: (3)

subscribed!

denmah

iTrader: (2)

i was really impressed with the ebay rails after the first set i got for my one fairmont

these seem REALLY nice if you couldnt tell from the video where i said it came with the fuel line, fittings, and fuel line fittings etc!

oscs

iTrader: (19)

I agree I bought a set for like $70 shipped and they where surprisingly well made.

denmah

iTrader: (2)

Attachment 724830

F110Mech

iTrader: (2)

Love the video denmah. I have a free 5.3 that I want to throw into something and have fun with using only eBay parts

7GRANDGERNADE

In your video you mentioned you were going to use a firebird shifter. The trailblazer/envoy shifter and cable is what I'm using in my 240. It fit well in factory console fyi

aknovaman

iTrader: (7)

GTO oil pan and notched front crossmember?

2muchboostNY

iTrader: (8)

^^^thats the typical way for the swap. There are companies like Sikky that use a custom oil pan which does not require notching the cross member but they are $400+. The GTO is the only front sump gm oil pan which had worked with the swap thus far.

lsxRanger94

If you were using 5/16 nylon to a corvette regulator these should work, but you probably going with an adjustable regulator.

http://www.summitracing.com/parts/rnb-800-118/overview/