Kenny Bell Mammoth in a 2007 Zo6 questions???
#1
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: Odessa,T.X.
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Kenny Bell Mammoth in a 2007 Zo6 questions???
What size cowl is it going to take fit the Mammoth under my hood? Is it worth it or possible?
Last edited by speedcrazy2; 06-12-2015 at 10:45 PM.
#5
We have a 3.4 whipple on a z06
It's definitely a furnace
Just driving around town out of boost iats will get in the 150s
Tuning has been a bitch, once iats start to rise you can't pull enough timing to get it to run right
Switched to a 50:50 mix of 93 and q16 with an alky control system meth kit maxed out and it finally stops trying to knock
This is at 26 to 27 psi on a low 9:1 compression stroker, they can make a bunch of fun power, but they have their inherent problems, especially crammed into a z06
It's definitely a furnace
Just driving around town out of boost iats will get in the 150s
Tuning has been a bitch, once iats start to rise you can't pull enough timing to get it to run right
Switched to a 50:50 mix of 93 and q16 with an alky control system meth kit maxed out and it finally stops trying to knock
This is at 26 to 27 psi on a low 9:1 compression stroker, they can make a bunch of fun power, but they have their inherent problems, especially crammed into a z06