Twin Turbo 69 Camaro Build
10-31-2015, 02:39 PM
#1
Twin Turbo 69 Camaro Build Figured I'd post in here as well (have a thread in the conversion section). Want to share the work that M2K is doing on the turbo kit for the car and the progress it's made.
Some brief details of the build:
1969 Camaro (first car, had since 1997)
Detroit Speed Subframe and Quadralink Rear suspension
TSP LSX 427 w/ Mast heads
Tranzilla T56 Magnum from RSGear
9" Rearend w/ Moser center section, 3.50 gear and tru-trac posi
Forgeilne GA3 18x9.5 and 18x12
Turbo Kit details:
Twin GT35R w/ TiAL housings
TiAL MV-R Wastegates
TiAL Q50 BOV
Stainless Works up/forward headers modified to fit
RCI Billet Runner Intake
Kit built by M2K Motorsports
Goals:
Fun Street car that can make 1000rwhp on pump gas.
PICS!
Parts:
Attachment 722337
Car (old intercoolers):
Attachment 722338
Attachment 722340
Turbo Kit:
Attachment 722341
Attachment 722342
Attachment 722343
Attachment 722345
New Intercoolers:
Attachment 722346
Some brief details of the build:
1969 Camaro (first car, had since 1997)
Detroit Speed Subframe and Quadralink Rear suspension
TSP LSX 427 w/ Mast heads
Tranzilla T56 Magnum from RSGear
9" Rearend w/ Moser center section, 3.50 gear and tru-trac posi
Forgeilne GA3 18x9.5 and 18x12
Turbo Kit details:
Twin GT35R w/ TiAL housings
TiAL MV-R Wastegates
TiAL Q50 BOV
Stainless Works up/forward headers modified to fit
RCI Billet Runner Intake
Kit built by M2K Motorsports
Goals:
Fun Street car that can make 1000rwhp on pump gas.
PICS!
Parts:
Attachment 722337
Car (old intercoolers):
Attachment 722338
Attachment 722340
Turbo Kit:
Attachment 722341
Attachment 722342
Attachment 722343
Attachment 722345
New Intercoolers:
Attachment 722346
10-31-2015, 02:56 PM
#3
Thanks. You can see more of the car build in conversion/hybrid. I have been building this for 5 almost 6 years now and the light is near at the end of this tunnel. Car has had a LOT of work done by various shops over the years, including most of the panels being replaced and all the pro-touring suspension being installed.
I cant wait to drive this thing!
I cant wait to drive this thing!
11-01-2015, 11:27 AM
#6
Very nice!
I am just starting the conversion from a single to twin turbos on my 67, and would love to see some closer pictures of the downpipe routing, and also the cold side tube routing.
EDIT: I just checked out your other thread, and saw how the downpipes are routed. very nice!
I am just starting the conversion from a single to twin turbos on my 67, and would love to see some closer pictures of the downpipe routing, and also the cold side tube routing.
EDIT: I just checked out your other thread, and saw how the downpipes are routed. very nice!
Last edited by 3pedals; 11-01-2015 at 11:47 AM.
11-01-2015, 01:05 PM
#7
Ah good. I was gonna say check it or I can post. I have MANY pictures hosted. If there is a specific angle or pic you want let me know.
Keep in mind I had to modify the stainless works headers. They hit my valve covers and very close to AC compressor.
Keep in mind I had to modify the stainless works headers. They hit my valve covers and very close to AC compressor.
