How is this cam ?
 

For a stock 6.0 turbo build.
stock 317 heads
single 7875 turbo probably
street car with good power curve wanted with a quick spool
sorry if these questions are dumb, im a boost newb:drive:

Intake 234 .598 lift/Exhaust 234 .576 LSA 116.

Imo for a street car it's too big.

Have u already got the cam or is it a freebie a discount or a full price option ? I wouldn't buy it for my street car buto if I already owned it or it was cheap and I was broke I'd run it I did a 231/235 622/617 on a street driven iron ls1 and it wasn't bad the open down pipe and other shit was way more a pain in the ass than actual driving characteristics

That's going to be a relatively tame camshaft, and it'll probably work just fine.

I use the term streetcar loosely because it will have plates and lights but by no means a comfort cruiser. just a gutted, caged '85 tbird to hurt feelings on the weekends.
My main concern is if it fits the turbo/engine setup...

Cam is too big for a 7875.

I assume you're going to use a stock style OEM intake manifold, so this is what I would do:

226/226 .612/.603 114+3