People running F1a-94 with aster bracket in F-body
#1
People running F1a-94 with aster bracket in F-body
So i am thinking of going FI with my 434 and ould ike to use this blower. Are there alot of people running this combo? I was only able to find one person running this and it seemed he had a decent amount of trouble making it fit.
#2
LS1Tech Sponsor
iTrader: (16)
The F-1A fits a little easier than the F-1C and F-1R, and quite a few people have run them with this combination. Like the F-1C and F-1R, the F-1A-94 has a 4.0" inlet, instead of the 3.75" inlet that is found on the F-1A and smaller blowers. The 3.75" opening on the truck inlet hat can be enlarged to a 4.0" opening with the use of a heat gun an either a tailpipe expander or a piece of 4" tubing with the end of it narrowed down. I had one customer who took a piece of 4" pipe, cut slits in the end of it to bring it in a little, then shoved the truck hat over it and started heating up the truck hat. Once he got the hat heated up he worked it down the pipe. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website