Some Hi-Flo shiznit came in today.... (pics)
#723
Originally Posted by 2002/Black/SS
hey SP, did marko give u any type of time frame for when hes gonna give u guys some money? or did he say he will just get it to u eventually
#728
Originally Posted by Sound Performance
I just talked to him. He promises to bring by the money tomorrow!!
i gave marko $6K deposit in february for a twin turbo system promised to be deklivered in 3 weeks for my c5 vette... bill says we've received most of the kit; we can't tell... no parts or shipping list and no photos of an insatall to compare it to. i'll send you everything i've received for $5k... you probbaly have a better shot at completing the kit and reselling it at a profit.
to all my fellow 'sufferers'; if ya know of any c5 guy lookin' for a tt system.. they can get mine, cheap and complete it at a bargain.
when this stuff stops bein' fun... it's time to move on!
#732
Here is a detailed list of parts that Bill gave me, Id like everyone to check it and let me know what parts you are missing. Email me the list please along with how much of a deposit you made and what your balance is.
Marko dropped off all of the IC pipes and ICs, so we are good to go there with the exception of being one IC short which I ordered.
I also ordered the Turbo XS BOVs and Tial WGs.
Here is the parts list:
- Drivers side header and Pass side header
- Short X over tube (Pass side)
- X over tube with flex (drivers side)
- Upper DP
- Lower DP
- 3 2.5" v band clamps
- 1 3" v band clamp
- WG to DP tube
- 3" exhaust clamp
- IC core with tabs welded on
- Turbo to IC pipe with BOV flange
- IC to engine bay pipe
- Pipe with flare to 3.5" (goes to maf or maf delete pipe)
- 4" intake pipe for turbo
- turbo to IC pipe coupler (2.5" or 3" depending on turbo selection)
- 3 3" couplers
- 3.5" coupler
- 4" to 3.5" 90 degree elbow for TB
- 7 3" hose clamps
- 2.5" or 3" clamp depending on turbo choice
- 3 3.5" clamps
- 3 4" clamps
- BOV
- 4" filter
- 4" silicone coupler
- turbo
- tial 38 mm WG
- -10 return line with turbo -10 fitting and -10 to 3/8npt oil pan fitting
- 2 straight 1/8npt to -4 fittings
- -4 feed line
- misc bolts, nuts, washers
- turbine heat shield
- ac drier w/extended line (on exchange or new purchase basis)
So everyone look this list over and be sure to email me it back with what you do not have!!
Thanks
Larry
Marko dropped off all of the IC pipes and ICs, so we are good to go there with the exception of being one IC short which I ordered.
I also ordered the Turbo XS BOVs and Tial WGs.
Here is the parts list:
- Drivers side header and Pass side header
- Short X over tube (Pass side)
- X over tube with flex (drivers side)
- Upper DP
- Lower DP
- 3 2.5" v band clamps
- 1 3" v band clamp
- WG to DP tube
- 3" exhaust clamp
- IC core with tabs welded on
- Turbo to IC pipe with BOV flange
- IC to engine bay pipe
- Pipe with flare to 3.5" (goes to maf or maf delete pipe)
- 4" intake pipe for turbo
- turbo to IC pipe coupler (2.5" or 3" depending on turbo selection)
- 3 3" couplers
- 3.5" coupler
- 4" to 3.5" 90 degree elbow for TB
- 7 3" hose clamps
- 2.5" or 3" clamp depending on turbo choice
- 3 3.5" clamps
- 3 4" clamps
- BOV
- 4" filter
- 4" silicone coupler
- turbo
- tial 38 mm WG
- -10 return line with turbo -10 fitting and -10 to 3/8npt oil pan fitting
- 2 straight 1/8npt to -4 fittings
- -4 feed line
- misc bolts, nuts, washers
- turbine heat shield
- ac drier w/extended line (on exchange or new purchase basis)
So everyone look this list over and be sure to email me it back with what you do not have!!
Thanks
Larry
#733
Originally Posted by 52172
Larry did you get a price from GM on the canisters? Has anyone contacted smearin to see if he would be kind enough to see his kit and order the correct couplers, clamps, plug wires, etc etc? Thanks
No Im sorry I havent called GM yet. Does smearin frequent this forum or thread?
#736
Originally Posted by 2002/Black/SS
i see uve put everything we need into a list, and im missing pretty much alot of it, but how much of that list do YOU have? have u ordered all of the things on it? or are u still waiting on ordering some of the stuff
I still need to order batt relocation kits. Will do tomorrow.
#737
Originally Posted by Sound Performance
I ordered V band clamps, gaskets, WGs, BOVs, air filters..... I have the ICs , IC pipes, couplers and heat shields here.
I still need to order batt relocation kits. Will do tomorrow.
I still need to order batt relocation kits. Will do tomorrow.
#738
Originally Posted by 2002/Black/SS
will the battery relocation kit make it complete? will that give u everything?